Loading ...
Loading ...
Loading ...
46
en Menu
Menu
The menu is used for changing individual
settings, accessing information and launch-
ing processes�
■ Press A to open the menu�
The dierent setting options will appear.
Navigating through the menu:
Press K and L to select the various
setting options, e�g� “Language”�
Turn the selector to set, e�g� “English”.
Settings
Language
English
1/12
For example:
Set the appliance at 15 minutes to switch
o automatically:
■ Press button A� The menu opens�
■ Touch L repeatedly until the display
shows “Switch off after”.
■ Turn the rotary selector and select
“0h 15min”.
■ Press button A� “Save changes?”
appears�
■ Touch [ Save ]� The setting is saved�
The drink selection appears on the display�
F
Press A to exit the menu at
any time� If no entry is made within
approx� 30 seconds, the menu
closes automatically and the settings
are not saved�
The following settings can be made:
Language
Set the desired language to show the
display texts�
Water hardness
Set this to the local water hardness�
Level “1 (soft)” to “4 (very hard)” can be
selected� The preset water hardness is
“4 (very hard)”�
F
It is important to set the water hard-
ness correctly to enable the appli-
ance to accurately indicate when the
descaling programme should be run�
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier� If a water softening
system is installed in the house, please
select the “Softening device” setting�
Water filter
If a water lter is inserted, renewed or
removed, the setting “Insert”, “Replace” or
“Remove” must be made in the menu�
F
A water filter lessens limescale
deposits, reduces impurities in water
and improves the coffee taste�
Water lters are available from retail
outlets or from customer services
(see the section “Accessories”)�
Inserting or renewing a water lter:
A new water lter must be rinsed before it
can be used�
■ Select either “Insert” or “Replace” with the
rotary selector�
■ Press the water lter rmly into the
opening of the water tank�
■ Fill the water tank with water up to the
“max” mark�
■ Remove the milk tube from the milk
container and close the door�
F
Caution: Do not jam the tube when
closing the door�
■ Place a container with a capacity of
0�5 litre under the outlet �
■ Press button C�
Water will now ow through the lter to
rinse it�
■ Then empty the container�
The appliance is ready for use again�
Loading ...
Loading ...
Loading ...