Installation
Instructions
GPF65
Side Mounting Brackets
PARTS SUPPLIED WITH KIT
¨ 2 Side mounting brackets with 4 mounting screws
TOOLS YOU WILL NEED:
¨ Phillips head screwdriver
¨ Measuring tape
¨ Safety glasses
¨ Gloves
4, #8 Pan head Phillips Screws
3/8" long for side mounting
Measuring Tape
Phillips Head
Screwdrivers Safety Glasses
Side Mounting Brackets
Gloves
On new installations, do not remove wood base until you
are ready to install the dishwasher. The dishwasher will
tip over when the door is opened.
STEP 1 DISCONNECT WATER
AND POWER
• Turn off water supply.
• Turn off power supply.
STEP 2 INSTALL BRACKETS
• Pull dishwasher out of the opening just enough to
access the tub frame.
• Fasten a side mounting bracket to each side of the tub
with the #8 pan head screws provided.
• Fasten the brackets to cabinet sides using the 2
Phillips head countertop screws.
IMPORTANT: Drive screws straight and flush. Protrud-
ing screw heads may scratch the top or sides of the
control panel and can interfere with door closing.
• Position dishwasher so that the door lines up with the
front face of adjacent cabinet.
IMPORTANT: Check to be sure the dishwasher is
centered in the opening and there is no interference
with adjacent cabinets when opening or closing the
door.
Install
2 Screws
Each Side
Side
Mounting
Brackets
Countertop
Mounting
Brackets
Tub Frame
Pub. No. 31-30538
Dwg. No. 206C1559P078
(N.D. 289) 9/01
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
PARTS SUPPLIED WITH
DISHWASHER
2 Wood mounting
screws
3/4"
Non-Wood Countertop
Side Brackets