Loading ...
Loading ...
Loading ...
2
• Install and level the
appliance in an area
suitable for its size and use.
• Make sure that the
electrical information on
the rating plate agrees with
the power supply. If it does
not, contact an electrician.
• The appliance is operated
by a 220-240 VAC/50 Hz
power supply. Abnormal
voltage fluctuation may
cause the appliance to fail
to start, or damage to the
temperature control or
compressor, or there may
be an abnormal noise
when operating. In such
case, an automatic
regulator shall be mounted.
• Only for UK: The
appliance’s power cable is
fitted with 3-cord
(grounding) plug that fits a
standard 3-cord (grounded)
socket. Never cut off or
dismount the third pin
(grounding). After the ap-
pliance is installed, the
plug should be accessible.
• Make sure that mains cable
is not caught under the
appliance during and after
carrying/moving the
appliance, to avoid the
mains cable becoming cut
or damaged. If the supply
cord is damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
person in order to avoid a
hazard.
• Do not install the appliance
in humid, oily or dusty
places, nor expose it to
direct sunlight and to water.
• Do not install the appliance
near heaters or
inflammable materials.
• FOR appliances with a
freezer compartment: if
there is a power failure do
not open the lid. Frozen
food should not be
affected if the failure lasts
for less than the hours
indicated on the rating
label (Temperature rise
time). If the failure is longer,
then the food should be
checked and eaten
immediately or cooked and
then refrozen.
Loading ...
Loading ...
Loading ...