Loading ...
Note
You can only use AC power as power supply. The lithium •
CR2032batteryisonlyforback-uppurpose.
When power is disconnected, the display backlight is off.
•
When is displayed, you need replace the battery as indicated.
Connect power D
Caution
Risk of product damage! Ensure that the power voltage •
corresponds to the voltage printed on the back or underside of
the clock radio.
Risk of electric shock! When you unplug the AC adapter, always
•
pull the plug from the socket. Never pull the cord.
Plug and set
The clock radio has “plug and set” feature. When power is
connected, the clock is set automatically.
Select time zone
Check if the time of the clock radio is consistent with the local time.
If not, adjust the time zone settings according to your location.
1 In standby mode, press TIME ZONE.
The current time zone number blinks on the display panel. »
2 Press TIME ZONE repeatedly to select time zone.
For United Kingdom and Ireland:
WesternEuropeanTime(WET) +0(bydefault)
Set clock E
In standby mode, you can set clock manually.
Select DST (daylight saving time) mode
Forcountrieswithdaylightsavingtime(DST),theclockradiooffers
youDSToptiontoadjustsummertime.
In standby mode, press and hold 12/24H·DST for two seconds.
The clock advances by one hour. »
Tip
ToexitDSTmode,repeattheaboveoperation. •
Toselect12/24hourformat,press • 12/24H· DST repeatedly.
4 Listen to FM radio
Tune to FM radio stations F
Note
Position the antenna as far as possible from TV, VCR, or other •
radiation source.
For optimal reception, fully extend and adjust the position of the
•
antenna.
Note
To turn on/off radio, press • RADIO.
Store FM radio stations automatically
Youcanstoreupto20FMradiostations.
1 Press RADIO to turn on the radio.
2 Press and hold PROG for two seconds.
The clock radio stores all the available FM radio stations »
andbroadcaststherstavailablestationautomatically.
Store FM radio stations manually
1 Tune to an FM radio station.
2 Press PROG.
The preset number begins to blink. »
3 Press PRESET +/- or TUNING +/- repeatedly to select a
number.
4 Press PROGagaintoconrm.
5 RepeatSteps1to4tostoreotherstations.
Note
To remove a pre-stored station, store another station in its •
place.
Select a preset radio station
In tuner mode, press PRESET +/- to select a preset number.
Adjust volume G
5 Set alarm timer
Set alarm time H
In standby mode, you can set two alarms to ring at different time.
Select alarm sound
For the alarm sound, you can select buzzer, your last heard radio, or
the melody stored in the clock radio.
Adjust AL1/RADIO·BUZZ·
1 or AL2/RADIO·BUZZ· 2 to
selectalarmsoundforAlarm1/Alarm2.
Activate/deactivate alarm timer I
1 Press AL1/AL2 to view alarm settings.
2 Press AL1/AL2 again to activate or deactivate the alarm
timer.
» AL1 or AL2 appears if alarm timer is on and disappears
if it is off.
To stop alarm, press the corresponding
• AL1/AL2
(or RADIO).
The alarm repeats ringing for the next day.
•
Note
When alarm sounds, you cannot adjust volume by rotating • VOL.
Snooze alarm
When alarm sounds, press SNOOZE.
Thealarmsnoozesandrepeatsringingveminuteslater. »
Toadjustalarminterval(inminutes),pressSNOOZE repeatedly.
6 Other features
Set sleep timer
This clock radio can switch to standby mode automatically after a
preset period.
Press SLEEP repeatedly to select the sleep timer period
(inminutes).
When the sleep timer is activated, »
appears.
To deactivate the sleep timer, press SLEEP repeatedly until [OFF]
(off)appears.
Project time onto wall/ceiling J
By projecting time onto a wall or ceiling, this clock radio offers you
a unique way to read time in the dark.
Warning
Risk of damage to eyes! Do not look at the glowing red light •
constantly.
Note
Before you start, switch • CLOCK/SET AL1/SET AL2/SET TIME
to CLOCK.
1 Press PROJECTION to turn on the projector.
2 Rotate the projector to adjust the projected direction.
3 Rotate the focus ring to adjust the image sharpness.
4 To reverse the projected image, switch FLIP to left or right.
Tip
To turn off the projector, press • PROJECTION again.
Adjust display brightness
Press BRIGHTNESS repeatedly to select different brightness levels:
high, mid, and low.
7 Product information
Note
Product information is subject to change without prior notice. •
5 10 15 20 25 30
15 30 60 90 120
off
Specications
Amplier
Rated Output Power 0.6WRMS
Tuner
Tuning Range FM:87.5-108MHz
Sensitivity
-Mono,26dBS/NRatio FM:<22dBu
SearchSelectivity FM:<28dBu
Total Harmonic Distortion FM: <3%
SignaltoNoiseRatio FM:>45dB
General information
AC power 100-240V~,50/60Hz
Operation Power Consumption <3W
StandbyPowerConsumption <1W
Dimensions
-MainUnit(WxHxD) 135x135x60.5mm
Weight
- With Packing
- Main Unit
0.6 kg
0.3 kg
8 Troubleshooting
Warning
Never remove the casing of this clock radio. •
To keep the warranty valid, never try to repair the clock radio
yourself.
If you encounter problems when using this clock radio, check the
following points before requesting service. If the problem remains
unsolved,gotothePhilipswebsite(www.philips.com/welcome).
When you contact Philips, ensure that the clock radio is nearby and
the model number and serial number are available.
No response from the unit
Disconnect and reconnect the AC power plug, then turn on •
the unit again.
Poor radio reception
Increase the distance between the unit and your TV or •
VCR.
Fully extend the FM antenna. •
9 Notice
This product complies with the radio interference requirements of
the European Community.
Anychangesormodicationsmadetothisdevicethatarenot
expressly approved by Philips Consumer Lifestyle may void the
user’s authority to operate the equipment.
Note
The type plate is located on the bottom of the apparatus. •
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it
meansthattheproductiscoveredbytheEuropeanDirective2002/96/
EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
Your product contains batteries covered by the European Directive
2006/66/EC,whichcannotbedisposedwithnormalhousehold
waste.Please inform yourself about the local rules on separate
collection of batteries because correct disposal helps to prevent
negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to
make the packaging easy to separate into three materials: cardboard
(box),polystyrenefoam(buffer)andpolyethylene(bags,protective
foamsheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
2011©KoninklijkePhilipsElectronicsN.V.Allrightsreserved.
Specicationsaresubjecttochangewithoutnotice.Trademarks
are the property of Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right to change products at
any time without being obliged to adjust earlier supplies accordingly.
AJ5030_05_UM_V1.0.indd 2 2011-4-15 14:23:32