Loading ...
INSTALLATION
The Traffic Light should be mounted at a height which
maximizes visibility.
1. Secure the Traffic Light to the mounting surface with appropriate
hardware (not provided).
2. Insert the 4-pin connector into the base of the Traffic Light and turn
the hold-down ring clockwise until snug.
NOTE: NPT mounting is recommended when a flat surface is not
available. The Traffic Light housing has 1/2" NPT thread on the top.
Remove top plug to allow NPT mounting. It will accept polished 304
stainless steel or anodized aluminum pipe threads. The bottom thread
is for the 4-pin connector only (not for NPT mounting).
WARRANTY
One Year Limited Warranty
LiftMaster warrants to the first consumer purchaser of this product that is free from defect in materials and/or workmanship for a period of 1 year
from the date of purchase.
WIRING
Traffic Light Signal Control
24V
AC
24V
AC
TIMER
DEFEAT
CMN
MAS
11
10
14
13
12
WARNING DEVICES MODULE
LOAD
R7
D3
D4
1
+5V +24V
OUT
+24VDC
D2
Q2
K2
R4
3
2
1
R2
Q1
D1
R6
Q3
C1
R8
C2
K1
J1
10
8
4
3
1
TB1
R8
R9
R1
R3
R5
13
+
TB2
RED
LT.
GREEN
LT.
120V IN
24 Vdc for
Horn/Strobe
Control Board
Power
LEDs
Brown
Black
Blue
White (not used)
Any color wire
will complete
the circuit.
Logic 3 Operator
Requires a Red/Green Light Control Module (RDGRNCARD).
Red/Green Light Control
Module (RDGRNCARD)
NOTE: In most cases the Traffic Light can be powered by the operator's transformer. If multiple accessories are powered by the operator, such as 2
sets of Traffic Lights and photoelectric sensors, a transformer upgrade may be required. (See Transformer Upgrades below.) A 460 V operator will not
require a transformer upgrade.
To Operator
Hold-Down
Ring
Top Plug
4-pin
Connector
Mounting hardware
(not provided)
Logic 4 and Logic 5.0 Operators
Requires a Timer Light Status Card (TLS1CARD).
TLS1CARD
40-35757-1
Timer Light Status Option Card
R3
R2
R1
6
5
4
3
2
1
T/TS 12
FD/SIS 11
COMMON 10
SIC 9
SIO 8
COMMON 7
(RELAYS)
OUTPUTS
INPUTS
5 A, 230 Vac, 30 Vdc Dry Contact Only
24VAC
24VAC
LMEP:
EDGE:
OPEN
CLOSE
STOP
COMMON
SBC
MAS
COMMON
TIMER
DEFEAT
POWER
Timer Light Status
Option Card (TLS1CARD)
Control Board
Black
Brown
Blue
White (not used)
N.O.
Comm
N.O.
Comm
White
Transformer Upgrades
Factory installed upgrade to 40 Va transformer ........................ 902140VAL
Field replacement 120 Vac/40 Va transformer ..............................21-32780
Field replacement 230 Vac/40 Va transformer ..............................21-32781
Optional Accessories
4-Pin, 15 ft. (4.6 m) Cable with Pigtail .................................... 4PCWPT-15
External Power Supply .................................................................100MAPS
Provides enough power to operate one RGL-CTL Red/Green Light.
1/2" NPT thread
Input: 110VAC
Output Voltage: 24VDC
Output Amperage: 100mA
Cable Leads: 38 ft. (11.6 m)
Loading ...
Loading ...
Loading ...