Loading ...
Loading ...
Loading ...
7
Warning: Use two or more people to move and install the wine refrigerator. Failure to do so
can result in back or other injury. Carefully remove the packaging materials. Remove any
shipping tape and glue from your wine refrigerator before use. Do not use sharp instruments,
rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your wine refrigerator.
Important: Do not remove any safety, warning, or product information labels from your wine
refrigerator.
Installing the Wine Refrigerator
The wine refrigerator should be installed in accordance with local electrical code requirements.
The wine refrigerator should also be placed in a location that is strong enough to support its
total weight, keeping in mind that it will weigh substantially more when fully loaded than when
empty. Before you plug the wine refrigerator into a power supply, be sure to let it stand
upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Wine Refrigerator
Types of Installation
This wine refrigerator has been designed for free-standing or built-in installation. In each case,
there must be adequate ventilation and access for service.
Free-standing Installation:
A free-standing installation will allow you to install the wine refrigerator in almost any place
you desire. You must follow the stated instructions for electrical requirements and leveling
the wine refrigerator.
Built-in Installation:
A recessed installation will allow you to install the wine refrigerator under a counter or in a
kitchen cabinet as long as the required clearance space around the wine refrigerator is
provided. It is necessary to allow adequate ventilation space around the unit, including at
the back of the unit. The following additional items must be observed:
1. Place the wine refrigerator in front of the installation location. Adjust the feet and
place the unit flat on the floor or on a platform depending on your installation
requirements.
2. If the electrical outlet for the wine refrigerator is behind the cabinet, plug in the wine
refrigerator.
3. Push the wine refrigerator into position.
Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
wine refrigerator.
Warning: DO NOT install the wine refrigerator behind a closed cabinet door.
Warning: DO NOT extend multiple full shelves at the same time. Doing so may put the wine
refrigerator at risk of tipping. It is recommended that only one shelf is fully extended at time.
Loading ...
Loading ...
Loading ...