Cybex 11020 INCLINE PULL User Manual

Loading ...

1-3

SECURING EQUIPMENT:

The machine has holes in the feet, which allow for ease in anchoring to the oor. Cybex strongly recommends that, to

eliminate rocking, tipping or falling over due to incorrect usage and misuse, equipment be secured to a solid, level surface.

1. The solid, level surface should not deviate more than 1/8” over a 10’ distance or as dened and required by local

building and architectural codes.

2. Anchoring of equipment must be completed by a qualied licensed contractor.

3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the

equipment to the oor.

4. Due to the wide variation of ooring on which machines may be anchored or installed, verify anchoring method and

anchoring fasteners with a qualied and licensed contractor.

5. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position..

6. Do not use machine until it is properly anchored.

MAINTENANCE:

Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the maintenance

requirements as specied in the manual.

STANDARD COMPLIANCE:

Cybex products meet or exceed applicable ASTM and EN Standards.

Warning/Caution Decals

Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury.

The warning and caution decals are shown on the following page. The diagrams following the decals show where each

decal is located.

Loading ...

Cybex 11020 INCLINE PULL Medical Eagle