Loading ...
Loading ...
Loading ...
27
Top Control Dishwasher
www.insigniaproducts.com
Cleaning the air gap
An air gap is an external plumbing device that is not actually part of your
dishwasher. Some state or local plumbing codes require the installation of
a drain air gap between the dishwasher and the home drain system. It is
usually located on the countertop near the sink or the dishwasher.
If there is an air gap installed with your dishwasher, make sure that it is
clean so the dishwasher will drain properly.
Before you clean the air gap, turn off the dishwasher, then remove the
plastic air gap cover and clean with a toothpick.
Protecting your dishwasher for long
periods
Your dishwasher should be protected from freezing if you plan to leave it
for extended periods in an unheated place. Have a qualified person do the
following:
To disconnect service:
1 Turn off the electrical power to the dishwasher at the supply source
by moving fuses or tripping circuit breaker.
2 Turn off the water supply.
3 Place a pan under the inlet valve, then disconnect the water line from
the inlet valve and drain it into a pan.
4 Disconnect the drain line from the pump and drain the water into a
pan.
To restore service:
1 Reconnect the water, drain, and electrical power.
2 Turn on the water and the electrical power supply.
3 Fill the detergent cup and the rinse aid cup and run the dishwasher
through a heated-wash cycle.
4 Check all connections to make sure that they do not leak.
Loading ...
Loading ...
Loading ...