Loading ...
Loading ...
Loading ...
11
Top Control Dishwasher
www.insigniaproducts.com
• 9 - Hi Temp Wash—Use to maintain the water temperature at 140° F
(60° C) max. during the wash portion of the cycle. This option is
available with the Auto, Normal, and Heavy cycles.
Controls and indicators
• 10 - Delay—Press repeatedly to delay the start of the selected wash
cycle until the delay time you want is shown on the display. You can
select 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, or 24 hours delay. After you select
the delay time you want, press START/Cancel once, then close the
door within four seconds. The delay begins to count down.
To cancel the delay and begin the cycle before the delay period is
complete, open the door, then press and hold Delay for three seconds
and then press START/Cancel.
• 11 - Display—When you open the door, shows the remaining hours
and minutes of the current cycle, delay hours remaining, and error
codes (see Error codes
on page 28).
• 12 - START/Cancel—Press to start the dishwasher after you have
selected a cycle and option. Close the door. The cycle indicator begins
to blink and the option indicator turns on. If you don’t close the door
within four seconds of pressing START/Cancel, the dishwasher
pauses. Press START/Cancel again to continue with the cycle.
To cancel a running cycle, open the door, press and hold
START/Cancel for three seconds, then close the door. After you close
the door, the dishwasher will show a one minute countdown and then
begin draining. The dishwasher then returns to standby status.
CYCLES
AVAILABLE OPTIONS
HEAT DRY SANITIZE RINSE HI TEMP
Auto X X X
Normal X X X
Heavy X X X
Delicate X N/A N/A
Express X X N/A
Important: If you open the door while delay is running, press START/Cancel,
then close the door within four seconds to begin the cycle from that point,
otherwise the dishwasher will stop the delay and will beep as a reminder to
resume the delay.
Note: If the remaining time on the display suddenly increases or decreases by
several minutes, it means that the Smart Sensor has checked the soil level or the
water needs to be heated to reach the required temperature.
Loading ...
Loading ...
Loading ...