Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 1:
Attach the Front & Rear Stabilizers (No. 3
& 4) to the Main Frame (No. 1) with 4
Carriage Bolts (No. 12), 4 Spring
Washers (No. 52), 4 Arc Washers (No.
13) and 4 Acorn Nuts (No. 14). Tighten
and secure with Spanner (No. 99).
STEP 2:
Check the Tension Controller (No. 17) is
at Level 8 (highest resistance) to ensure the
cable is the longest. Connect Extension
Wire (No. 18) to Sensor Wire (No. 20) then
connect the cable of Tension Controller
(No. 17) to the hook of the Tension Cable
(No. 19) as shown in Figure A.
1. Insert eye of upper tension cable into the
cable lock.
2. Pull the tension cable so that you can
insert the cable into the gap at the top of
the metal bracket.
3. Lower the tension cable so that it sits on
the metal bracket.
Remove pre-assembled 6 Inner Hex Bolts
(No. 16), 6 Spring Washers (No. 52) and 6
Arc Washers (No. 13) from Main Frame
(No. 1), then attach the Handlebar Post
(No. 2) to the Main Frame (No. 1) with 6
Inner Hex Bolts (No. 16), 6 Spring
Washers (No. 52) and 6 Arc Washers (No.
13) that were removed. Tighten and secure
with Wrench (No. 100).
NOTE: Do not completely tighten the bolts
yet.
Loading ...
Loading ...
Loading ...