Greenworks GD40LM46SP Self Propelled Cordless Lawnmower

OPERATOR MANUAL - Page 4

For GD40LM46SP. Also, The document are for others Greenworks models: GD40LM46SPK6

PDF File Manual, 187 pages, Read Online | Download pdf file

GD40LM46SP photo
Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is used for domestic lawn mowing. The cutting
blade must be approximately parallel to the ground. All four
wheels must touch the ground while you mow
.
1.2 OVERVIEW
Figure 1-11.
1
Handle knob
2
Lower handle
3
Bracket
4
Upper handle
5
Bolt
6
Knob
7
Grass catcher
8
Mulch plug
9
Side discharge chute
10
Rear discharge door
11
Grass catcher handle
12
Hook
13
Door rod
14
Mulch plug handle
15
Discharge chute
16
Side discharge door
17
Recesses
18
Pivot
19
Height adjustment lever
20
Battery door
21
Battery compartment
22
Safety key
23
Battery release button
24
Start button
25
Handle bar
26
Bail switch
27
Self-propel lever
28
Speed control button
29
Blade
30
Wood
31
Mounting screw
32
Arrows
2 SAFETY
W
ARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
W
ARNING
Do not change or make accessories that are not
recommended by the manufacturer
.
W
ARNING
Do not put in the safety key or the battery pack until you
assemble all the parts.
3.1 UNPACK THE MACHINE
W
ARNING
Make sure that you correctly assemble the machine before
use.
W
ARNING
If the parts have damage, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2.
Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2 UNFOLD THE LOWER HANDLE
Figure 2.
1.
Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three positions on
the brackets.
4. Turn the handle knobs 90° until they engage the holes in
the brackets.
NOTE
Make sure that the two handle knobs are in the same
position.
W
ARNING
Do not make damage to the cables when you fold or unfold
the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3.
1. Align the holes in the upper handle and the lower handle.
4
English
EN
Loading ...
Loading ...
Loading ...