Loading ...
Loading ...
Loading ...
40
HOW TO ATTEND TO A FAULT
START HERE
Press
to stop the beeping.
Note down the fault code.
Look up the fault in the
table opposite.
A1: Ensure the water supply is
on, press
again to clear the
fault then press to resume
the wash program.
Press
. Wait a few seconds,
then press again.
YES
YES
YES
NO
NO
NO
A6: Open the drawer and
check the spray arm.
A09: (DD***C models only): Ensure
the water supply is on. Press
to clear the fault, then run the
sanitize cycle again.
A3: Ensure the drainage hose
and connection to pipes are not
blocked. Press
to clear the
fault then press to resume
the wash program.
Has the spray arm loosened
or come off its mounting?
Refit the spray arm
following instructions in
section ‘User maintenance
instructions’, then close
the drawer, press
again,
then press to resume the
wash program.
If it’s a ‘A’ code
Has the fault code disappeared?
Has the dishwasher resumed
normal operation?
Has the fault code disappeared?
You have corrected the fault
and can continue to use your
dishwasher as normal.
Disconnect the dishwasher from the
power supply (unplug or switch off
at circuit breaker), turn off its water
supply, then contact Customer Care
with the fault code information. See
your ‘Service and warranty’ booklet
for contact details.
The fault has
reset. You can
continue to use
your dishwasher.
If it’s an ‘F’ code
Loading ...
Loading ...
Loading ...