Loading ...
Loading ...
Loading ...
29
WATER SOFTENER (SOME MODELS ONLY)
How to fill the salt reservoir
1 Open the drawer(s).
2 Unscrew the salt reservoir cap by turning anticlockwise.
3 Place the salt into the salt container and pour the contents into the salt reservoir.
The salt reservoir can hold up to approximately 1 lb/0.5 kg of salt.
4 Fit the cap tightly back into its original position.
5 If you do not wash your dishes immediately after filling the salt reservoir, run a Rinse
program to remove any salt water or spilt granules.
Note:
When filling the salt reservoir, you may
notice water being displaced from the
water softener overflow.
IMPORTANT!
The water softener must always be filled
with granular salt made especially for
dishwasher water softening systems.
We do not recommend the use of cooking
salt like table salt, rock salt or pellets as
they may contain impurities that will impair or
diminish the life of the water softener.
The salt reservoir
Water softening can only take place when there
is salt in the reservoir. The salt reservoir must
be filled prior to using the dishwasher and
whenever the salt indicator light is red.
Salt indicator light
●
If the salt indicator light is red, the salt reservoir is empty.
●
If the salt indicator light is black, there is enough salt in
the reservoir for the wash program that has been selected.
●
The display will also indicate when the salt reservoir is empty by displaying the salt
symbol.
IMPORTANT!
Do not pour detergent or rinse aid into the salt
reservoir. Detergent and rinse aid will destroy
the water softener.
Salt
container
Salt indicator light
Salt reservoir cap
Salt only NO Detergent NO Rinse Aid
Salt
reservoir
Loading ...
Loading ...
Loading ...