Loading ...
Loading ...
Loading ...
26 / EN
Dryer / User Manual
7 Troubleshootng
Drying operation takes too long.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter
drawer. (for the products with a heat pump)
• The condenser might be blocked. >>> Wash the condenser.(for the products with a
condenser )
• The ventilation grills in front of the machine may be clogged. >>> Remove any objects in
front of the ventilation grills that blocks air.
• Ventilation may be inadequate because the area where the machine is installed is too
small. >>> Open the door or windows to prevent the room temperature from rising very
high.
• A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
• Excessive amount of laundry might be loaded. >>> Do not load the the clothes dryer
excessively.
• Laundry might not have been spun dry adequately. >>> Perform a higher speed spin dry
on the washing machine.
Clothes come out damp after drying.
• A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type or
use time programs as extra.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• The condenser might be blocked. >>> Wash the condenser. (for the products with a
condenser)
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter
drawer.(For the products with a heat pump)
• Excessive amount of laundry might be loaded. >>> Do not load the the clothes dryer
excessively.
• Laundry might not have beenspun dry adequately. >>> Perform a higher speed spin dry
on the washing machine.
The clothes dryer does not turn on or program cannot be started. The clothes dryer does not
run after it is programmed.
• Power plug might be unplugged. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Ensure that the loading door is properly closed.
• A program might not be set or Start/Stand-by button might not be pressed. >>> Check
that the program is set and it is not in Stand-by position.
• Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
• Loading door might not be closed completely. >>> Ensure that the loading door is
properly closed.
• There might be a power outage. >>> Press the Start/Stand-by button to start the
program.
• Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.
Loading ...
Loading ...