Loading ...
Loading ...
Loading ...
V2 ENGLISH 19-0260
2 Turn on your TV, then press INPUT or SOURCE. Select the
input for your antenna (usually labeled TV).
3 Open your TV’s Setup menu, then select the “scan” or “channel
scan” option. Your TV automatically searches for available
channels in your area. Refer to your TV manual for detailed
instructions.
For the best reception, check the following conditions:
• Keep the antenna away from sources of interference, such as
air conditioners, elevators, hair dryers, or microwave ovens.
• Place the antenna near a window when using in an indoor
environment.
• Install the antenna as high as possible to avoid possible
obstacles between the antenna and transmission tower.
Obstacles may cause temporary signal loss.
• Run a channel scan every time you move your antenna.
• If possible, position your antenna toward the transmission
tower.
• To determine which channels are available in your area, visit
www.antennaweb.org. Type in your zip code to get help with
antenna placement.
• Test the antenna in multiple locations to nd the strongest signal.
• This antenna is an indoor antenna. Do not place it outside.
• Run a channel scan monthly to make sure that you are
receiving all possible channels.
• Some TVs have a signal strength indicator that can help with
antenna placement. See your TV manual to see if your TV has
this feature.
• This antenna works with any TV or device with an ATSC tuner.
Refer to the device manual to check compatibility.
TROUBLESHOOTING
SOLUTION
• Make sure that you have selected the correct input on your TV.
• Go to the menu on your TV or set top box, such as a cable/satellite box or
streaming media device, and rescan the channels.
• Make sure that all your connections are correct and secure.
• Adjust your antenna, then rescan for available channels on your TV or set
top box.
• Make sure that you are connected to a TV or set top box with an ATSC tuner.
• Adjust your antenna, then scan for available channels on your TV or set top
box.
• Keep the antenna away from sources of interference such as air
conditioners, hair dryers, and microwave ovens.
• Your antenna may be too far from the broadcast antenna to receive an
adequate signal. The signal may also be aected by obstructions between
the broadcast antenna and your antenna.
• Make sure that the signal strength from the antenna is adequate. Some
TVs have a signal strength indicator. See your TV manual to see if your TV
has this feature.
• If you use a UHF/VHF amplier to boost the signal level, make sure that it is
operating correctly.
• To determine which channels are available in your area, visit
www.antennaweb.org. Type in your zip code to get help with antenna
placement.
• Adjust your antenna, then scan for available channels on your TV or set top
box.
• Make sure that the signal strength from the antenna is adequate. Some
TVs have a signal strength indicator. See your TV manual to see if your TV
has this feature.
PROBLEM
Cannot nd any
channels
Picture quality is
good on some
channels and poor
or no reception on
others
I don’t know what
digital TV
reception I get in
my area
Not all channels are
available after
performing a
channel scan
SPECIFICATIONS
• Frequency range:
• VHF 174-230 MHz
• UHF 470-860, MHz
• Receiving range: UHF/VHF
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
Loading ...