User Manual
B
C
T
H
G
I
L OT E
K
AW
SET TIME
ab
dc
H
R
M
I
N
CLOCK
ab
R
A
D
I
O
TUNING
T
HG
I
L
OT
E
K
AW
VOL
ab
dc
H
R
M
I
N
C
L
O
C
K
SET AL 1
SET AL 2
PM
G
D
E
FH
Register your product and get support at
AJ5000
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
AJ5000_05/79_UM_V1.0
EN User manual
EN
1 Important
Safety
Read these instructions.•
Heed all warnings.•
Follow all instructions.•
Do not block any ventilation openings. Install in accordance with •
the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat •
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being walked on or pinched, •
par ticularly at plugs, convenience receptacles, and the point
where they exit from the clock radio.
Only use attachments/accessories specified by the •
manufacturer.
Unplug this clock radio during lightning storms or when unused •
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is •
required when the clock radio has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the clock radio, the clock
radio has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This clock radio shall not be exposed to dripping or splashing. •
Do not place any sources of danger on the clock radio (e.g. •
liquid filled objects, lighted candles).
Where the MAINS plug or an appliance coupler is used as the •
disconnect device, the disconnect device shall remain readily
operable.
2 Your clock radio
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
Introduction
With this unit, you can:
listen to FM radio;•
know the time;•
wake up by buzzer alarm, radio, or melody; and •
enjoy mood light. •
What’s in the box B
Check and identify the contents of your package:
Overview of the main unit A
a HR/TUNING +/-
Adjust hour.•
Tune to radio stations.•
b AL1/AL2
Turn on /of f alar m.•
View alarm settings.•
c PROG/SCAN
Scan/store radio stations.•
d COLOR
Select mood light color. •
e SNOOZE/BRIGHTNESS
Snooze alarm.•
Adjust display brightness.•
f RADIO
Turn on/off radio.•
Turn off the ringing alarm.•
g SLEEP
Set sleep timer.•
h MIN/PRESET +/-
Adjust minute.•
Select a preset radio station.•
i
Turn on/off mood light.•
Adjust brightness level of mood light.•
j CLOCK/SET AL1/SET AL2/SET TIME
Set time/alarm.•
View time.•
k 12/24H·DST
Select 12/24 hour format.•
Select daylight saving time (DST) option.•
l TIME ZONE
Select time zone.•
m WAKE TO LIGHT
• ON/OFF: activate/deactivate mood light when alarm
sounds.
n AL1/RADIO·BUZZ·
1
Select alarm source for Alarm 1.•
o AL2/RADIO·BUZZ·
2
Select alarm source for Alarm 2.•
p Power cord & Antenna
q Battery tray
r VOL
Adjust volume.•
3 Get started
Always follow the instructions in this chapter in sequence.
Install battery C
Warning
Risk of explosion! Keep batteries away from heat, sunshine or fire. •
Never discard batteries in fire.
Danger of explosion if battery is incorrectly replaced. Replace only
•
with the same or equivalent type.
The battery contains chemical substances, so it should be disposed
•
of properly.
Keep children away from the batter y.
•
Note
You can only use AC power as power supply. The lithium CR2032 •
battery is only for back-up purpose.
When power is disconnected, the display backlight is off.
•
When
is displayed, replace the battery as indicated.
Connect power F
Caution
Risk of product damage! Ensure that the power voltage corresponds •
to the voltage printed on the back or underside of the clock radio.
Risk of electric shock! When you unplug the AC adapter, always pull
•
the plug from the socket. Never pull the cord.
Plug and set
The clock radio has “plug and set” feature. When power is connected,
the clock is set automatically.
Select time zone
Check if the time of the clock radio is consistent with the local time. If
not, adjust the time zone settings according to your location.
1 In standby mode, press TIME ZONE.
The current time zone number blinks on the display panel. »
2 Press TIME ZONE repeatedly to select time zone.
For Australia:
Australian Western Standard Time (AWST) +8
Australian Central Standard Time (ACST) +9.5
Australian Eastern Standard Time (AEST) +10 (default)
New Zealand Standard Time (NZST) +12
For United Kingdom and Ireland:
Set clock D
In standby mode, you can set clock manually.
Select DST (daylight saving time) mode
For countries with daylight saving time (DST), the clock radio offers you
DST option to adjust summer time.
In standby mode, press and hold 12/24H·DST for two seconds.
The clock advances by one hour. »
Tip
To exit DST mode, repeat the above operation. •
To select 12/24 hour format, press • 12/24H·DST repeatedly.
4 Listen to FM radio
Tune to FM radio stations E
Note
Position the antenna as far as possible from T V, VCR , or other •
radiation source.
For optimal reception, fully extend and adjust the position of the
•
antenna.
e
b
a
d
f
c
g
h
i
j
r
k
l
m
n
o
q
p
THG
I
L OT E
KA
W
A
Western European Time (WET) +0 (default)
(For illustration only)
Loading ...
