Loading ...
Loading ...
Loading ...
8
en-us Preparing Kitchen Units
Removing Packaging
NOTICE
To prevent damage to your floor keep the unit in its
packaging base until ready to be placed in the cabinet
opening. Do not slide the unit across the flooring.
Different models use different packaging materials.
Actual brackets may look differently. Bracket remains in
packaging base.
1. Cut straps on outside of box.
2. Remove cardboard box.
3. Remove all top and side cardboard and Styrofoam
braces.
4. Place oven in front of cabinets where it is to be
installed.
Install Appliance
Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE
Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.
Mount to Cabinet
If there is no fitted shelf above the appliance, secure the
appliance against tipping over when the door is opened.
Fit two standard angles
3
/
16
” (5 mm) above the appliance
at 17
3
/
4
” (450 mm) depth inside the cabinet.
1. Do not kink or trap the connecting cable, or route it
over sharp edges.
2. Centre the appliance.
There must be an air gap of
3
/
16
” (5 mm) between the
appliance and adjacent cabinets.
3. Using a spirit level, adjust the appliance so that it is
perfectly level.
Loading ...
Loading ...
Loading ...