Loading ...
Loading ...
Loading ...
9
Checking Burner Cap Placement
Check to make sure that there is no gap between the
burner cap and burner base. See illustration below for
correct and incorrect placements of the burner cap.
You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Install Grates
First position the outer grates, followed by the the central
grate. If you only have two grates, the order in which you
position them is not relevant.
Special Accessories (not included)
Operation
Before Using the Appliance for the First Time
▯ Remove all packing materials and literature from the
cooktop surface.
▯ Wipe with a clean, damp sponge and dry.
▯ There may be a slight odor during the first several
uses. This is normal and will disappear.
▯ Optimum cooking results depend on the proper
cookware being selected and used. See “Choosing
Cookware - Cookware Recommendations”.
▯ Read all safety precautions and Use and Care Manual
information prior to operating.
About the Appliance
Use the cooktop for surface cooking applications such
as boiling, frying, simmering, steaming and sautéing.
9 WARNING
The burning of gas cooking fuel can create small
amounts of carbon monoxide, benzene,
formaldehyde and soot. To minimize exposure to
these substances, the burners should be adjusted
by a certified installer or authorized servicer to
ensure proper combustion. Ensure proper
ventilation with an open window or use a ventilation
fan or hood when cooking with gas. Always operate
the unit according to the instructions in this manual.
Wok ring Use:
Only suitable for dual-flame burners.
Use cookware with a rounded bottom.
Order number: HEZ9GW23UC
Griddle plate Use:
The griddle plate with non-stick coating
allows meals that are usually cooked in
a pan to be prepared with reduced fat.
Order number: HEZ9GR41UC
Backguard Use:
Back panel protection.
Order number 30": HEZ7YZ30UC
Order number 36": HEZ7YZ36UC
Loading ...
Loading ...
Loading ...