Loading ...
Loading ...
Loading ...
Install weight plates
1. Remove screws and washers securing top guide rod caps to frame bracket using a Phillips
screwdriver.
QtyDescription
2Screw1
2Washer2
2Top guide rod cap3
2Compression spring4
1Frame bracket5
2. Lean guide rods slightly outward, away from machine, DO NOT put excessive pressure on guide
rods, it will damage lower guide rod caps.
3. Wipe the entire length of the guide rods with a clean cloth.
4. Lubricate the guide rods with a light coating of medium weight oil.
5. Install each weight plate, one at a time, so wide edge of bushing faces upward (1) and narrow edge
of bushing (2) faces downward.
Incorrect: Narrow bushing edge downward.Correct: Wide bushing edge upward
6. Install lifting post.
7. Install compression spring and top guide rod cap onto guide rod. Slide spring loaded top guide rod
cap down guide rod until cap is clear of guide rod plate and install.
8. Install screws and washers securing top guide rod caps to frame bracket using a Phillips screwdriver.
9. Repeat for opposite side.
Page 11 of 24
Jungle Gym Dip Chin Tower Part Number 17151-999-4 E
Loading ...
Loading ...
Loading ...