User Manual Insignia NS-MB5202BL 5,200 mAh Portable Compact Charger

Documents for Insignia NS-MB5202BL

The following documents are available:
User Manual Photos
NS-MB5202BL photo

User Manual

For NS-MB5202BL. Also, The document are for others Insignia models: NS-MB5202B, NS-MB5202R, NS-MB5202B-C

CHARGING YOUR MOBILE
BATTERY
Fully charge your mobile battery before using it for
the rst time. This will take about 4 hours.
1 Plug the small end of the USB cable into the
mobile batterys micro USB port.
2 Plug the other end into a standard USB port on
your computer, car charger, or wall charger (not
included). The mobile battery automatically
begins charging and the LED turns on.
Note: All four LEDs turn on when the mobile battery is
fully charged.
CHARGING YOUR DEVICES
1 Plug the large end of the USB cable into the mobile
batterys USB port.
2 Plug the other end into your device. The mobile
battery automatically begins charging your device.
Notes:
If your device requires a dierent connector than the one
provided, use the cable that came with your device
Recharge the mobile battery when the red LED starts
blinking.
COMPATIBILITY
Compatible with most mobile devices, including
iPhones.
If your device requires a dierent connector, use
the cable that came with your device.
FEATURES
V3 ENGLISH 17-0622
SPECIFICATIONS
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC Caution
Changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call U.S. and Canada
(877-467-4289) Mexico (01-800-926-3000)
www.insigniaproducts.com
iPhone is a trademarks of Apple Inc., registered in the U.S. and other
countries.
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
PACKAGE CONTENTS
Mobile battery pack
Micro USB charging / sync cable
Quick Setup Guide
Before using your new product, please read these instructions to
prevent any damage.
Input
Output
Capacity
5V, 1.5A
5V, 1.5A
5200 mAh
QUICK SETUP GUIDE
Mobile Battery
Pack
NS-MB5202B / NS-MB5202BL /
NS-MB5202R / NS-MB5202B-C
○○○○
○○○●
○○
○●●●
●●●●
SAFETY INFORMATION/CAUTION
Do not expose your mobile battery to heat, re, or water.
Do not modify, disassemble, open, drop, crush, puncture, or
shred the internal battery.
This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
Do not charge devices while the mobile battery is
recharging.
Recharge the mobile battery if it has not been used for more
than 90 days.
Risk of res and burns. Do not open, crush, heat above 140°F
(60°C), or incinerate. Follow the manufacturers instructions.
Operation environment temperatures: 32~104°F (0~40°C)
This product is safe for regular use under normal conditions. As
with any device using electrical power, some situations may be
unsafe and injuries or damages could result. To minimize or
avoid unsafe conditions, read and follow the instructions before
using.
4 LEDs = 75-100% power
3 LEDs = 50-75% power
2 LEDs = 25-50% power
1 LEDs = 5-25% power
Blinking LED = < 5% power
If none of the LEDs light, the battery
needs to be recharged.
Final at size: 10.2 in x 3.6 in (258 × 91 mm)
Final fold size: 1.7 x 3.6 in. (43 × 91 mm)
○○○
Micro USB
USB
LED status
button
NS-MB5202B_17-0622_QSG_V3_ENSP.ai 1 7/20/2017 8:46:11 AMNS-MB5202B_17-0622_QSG_V3_ENSP.ai 1 7/20/2017 8:46:11 AM
Loading ...
Loading ...
Loading ...