Loading ...
Loading ...
Loading ...
820685
41
ADDING/REMOVING LAUNDRY DURING WASHING MACHINE OPERATION
After a certain period of time, the washing machine door can be opened if the water level and
temperature are below a predefined threshold.
If the conditions below are met, then the electronic door lock is released and the washing machine
door can be opened:
• water temperature in the drum has to be suitable,
• water level in the drum has to be below a certain value.
In order to add or remove laundry from the washing machine during programme operation, proceed
as follows:
1. Press the (3) START/PAUSE button.
2. If all conditions for release of electronic door lock are met, then you can open the washing
machine door and add or remove laundry from the drum.
3. Close the washing machine door!
4. Press the (3) START/PAUSE button.
The washing program will resume.
If you add a considerable amount of laundry during the wash, the laundry could be washed less
effectively, since the washing machine initially sensed a lower weight of the load of laundry and
added a smaller amount of water. Insufficient amount of water relative to the amount of laundry
could also cause damage to the laundry (rubbing of dry laundry),
and washing time can be longer.
Washing time will resume from the point at which the washing programme was interrupted.
ERRORS
In case of an error or fault, the programme will be interrupted.
Flashing signal lights and an acoustic signal will warn about such occurrence (see
TROUBLESHOOTING TABLE), and the error will be indicated on the display (E:XX).
POWER SUPPLY FAILURE
In case of a power supply failure, the washing programme is interrupted. When power supply
resumes, »PF« (Power Failure) will appear on the display unit. To resume the washing programme,
press the button (3) START/PAUSE.
Delay time will not be reset.
Washing time will resume from the point at which the washing programme was interrupted.
Loading ...
Loading ...
Loading ...