Loading ...
Loading ...
Loading ...
60
4
Set the margin shift.
(1) Touch the margin shift position.
Select one of the three positions.
(2) Set the amount of the margin shift with
.
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
5
Press the [COLOR START] key ( )
or the [BLACK & WHITE START] key
().
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time. If you are using the sort function or other
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
Rotation copy cannot be used in combination with margin shift.
To cancel the margin shift setting...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Initial Margin Shift Setting
The default margin shift setting can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".
Special Modes
Margin Shift
OK
OKCancel
Right
Left
Down
Side 1 Side 2
(0 1)
inch
(0 1)
inch
1/2 1/2
(1) (2) (3)
or
Loading ...
Loading ...
Loading ...