Loading ...
Loading ...
Loading ...
−−
1 15/16 in (50 mm)
1 3/16 1 9/16 in (30 40 mm)
LEFT SIDE
(1) chain adjustment plate
(2) red zone
(2)
(1)
156
Adjustment
Drive Chain
Servicing Your Honda
Safety Precautions
Wear Inspection The bottom part of the frame may be
damaged by excessive drive chain slack of
more than:
Drive chain slack should be checked and
adjusted, if necessary, every 500 miles
(800 km). When operated at sustained
high speeds or under conditions of
frequent rapid acceleration, the chain may
require more frequent adjustments.
Refer to on page .
Check the chain wear label when adjusting
the chain. If the front edge of the chain
adjustment plate ( ) enters the red zone
( ) on the label after the chain has been
adjusted to the proper slack, the chain is
excessively worn and must be replaced.
The proper slack is:
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1
2
76
(CBR600RR ABS only)
０９／０９／１７ １１：２８：２０ ３１ＭＦＪ６３０ ０１６５
Loading ...
Loading ...
Loading ...