Micro USB cable
microSD
SD
system that is supported by your phone. Check
your phone‘s documentation to determine how
to do this and what le system to use.
TROUBLESHOOTING
If your card or les do not display on the
phone, try disconnecting the card reader from
the phone and reconnecting it again.
Visit www.insigniaproducts.com for more
details.
SPECIFICATIONS
PACKAGE CONTENTS
• Card Reader
• Quick Setup Guide
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
ICES-003 statement
CAN ICES-3 (B)/NMB-3(B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
For additional information, see the online
User Guide.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289
(U.S. and Canada) or 01-800-926-3000
(Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
Before using your new product, please read these instructions to prevent any damage.
V1 ENGLISH 17-0170
QUICK SETUP GUIDE
Memory Card
Reader
NS-MCR17MUSB
PHONE REQUIREMENTS
• Android 4.5 or higher, Windows Phone 10
(Check with your phone manufacturer for
compatibility.)
FEATURES
• Compact size
• Multifunctional card reader including SD
and micro SD card slots
• Compatible with Android and some
Windows mobile devices that support
On-The-Go (USB OTG) and equipped with
Micro USB 2.0 port
• No APP, easy to use
• Plug & Play and support hot plug
• Works with the following card formats:
Micro SD/T-FLASH/Micro SDXC/Micro
SDHC,SD/SDHC/SDXC/Mini-SD
USING THE CARD READER
1 Plug the micro USB connector from the
card reader into an available micro USB
port on your phone. Your phone installs
drivers automatically.
2 Plug a memory card into the card reader.
Caution: Insert cards into the correct slot, label
side up. Failure to do so may result in damage to
your card and/or card reader.
Note: If your phone does not recognize the card,
it might be because your phone’s operating
system does not support the le system used on
the card. If that’s the case, you must reformat the
card with your phone or computer to a le
LEGAL NOTICES
FCC Information
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment o and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
Dimensions
(W × H × D)
Transmission port
Transmission rate
Working temperature
Working humidity
1.6 × 1.4 × 0.3 in.
(41 × 37 × 8.3 mm.)
Micro USB 2.0
480 bps (MAX)
32° ~ 122°F (0° ~ 50°C)
20% RH~ 85% RH
LED indicator
Loading ...
