PAD-AFS
SUPPORT@CTADIGITAL.COM
Gooseneck flexes by hand.To adjust the height of the pole,
turn plastic cover counter-clockwise and raise or lower the pole
to desired height. Turn clockwise again to lock it in place.
4.
Biggest
Allen Key
360 rotation
o
270 rotation
o
Multi
direction
flexing
Use the biggest Allen key to tighten and loosen the
gooseneck connection screw, adjusting ease of
rotation in the tablet holder.
2. Connecting the Tablet Holder to the Pole and Installing Your Device
Press button on side of tablet holder to
slide open. Insert your tablet against
spring arm,then slide other end back
down.
Screw the gooseneck onto the
metal connection of the pole by
turning clockwise.
3. Adjustment:
Smallest Allen Key
Gooseneck
Metal Connection
Use the smallest Allen key to
tighten the meter screws on
both sides of the gooseneck.
Note: if meter screws are
already in, unscrew before
attaching gooseneck.
Instructions:
1. Base Assembly and Connecting the Metal Cover:
METAL CONNECTION
HEIGHT
ADJUSTMENT
KNOB
POLE
METAL
CROSS BASE X 2
CONNECTION SCREW BOLT,
WASHERS AND NUT
Pole Assembly and Pole Nut
Cross Base Sections (2)
Medium
Allen Key
1) Place the metal base pieces with the higher
piece on top of the cross base. Align the holes
at the bottom of the pole with the holes on the
cross base.
2) Insert a screw bolt with a washer into each
of 4 holes. Place another washer on the
underside of each screw bolts.
3) Grip the nut on the underside with one hand,
and use the other to tighten each screw with
Medium Allen key. Repeat to tighten all four
screw bolts.
4. Rotate the grip counter clockwise to
loosen completely and remove from top
of pole.
5. Place the square metal cover over
the top of the pole and slide down to
stand base.
6. Place grip back over stand pole
and tighten.