Loading ...
Loading ...
Loading ...
8
V. ASSEMBLY INSTRUCTIONS
1. Remove the bolts and nut from the
bottom tube, then attach the Front
Stabilizer (pt.15) to the Main Frame
(pt.16) using two sets of Ø8 Flat
Washers (pt.5), M8 Domed Nut (pt.6)
and M8*45 Carriage bolt (3).
2. Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of Ø8
Flat Washers (pt.5), M8 Domed Nut
(pt.6) and M8*45 Carriage bolt (3).
FIG 1
1. Slide the Vertical Seat Post (pt.10) into the
seat post housing on the main frame
(pt.16). Then slide the Seat Post (pt.12) into
the Vertical Seat Post (pt.10). You will have
to slacken the knurled section of the
Spring Adjustment Knob (pt.7) and pull the
knob back and then select and align
holes for the desired height. Release
the knob and retighten the knurled
portion.
2. Now fix the Seat (pt.13) to the Vertical
Seat Post (pt.12) as shown and tighten the
bolts around the screws under the seat.
FIG 2
4
1. PREPARATION
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this
instruction sheet you will find an explosion drawing with all single parts (marked with numbers)
which this item consists of.
2. ASSEMBLY INSTRUCTION
3
6
5
16
6
5
15
3
13
12
7
7
10
16
| ASSEMBLY INSTRUCTIONS
Loading ...
Loading ...
Loading ...