User Manual - Page 2

For HR1871/00. Also, The document are for others Philips models: HR1871, HR1870

Loading ...
ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at
www.philips.com/welcome.
General description
1 Motor unit
- A Driving shaft
- B Locking arm
- C Control knob
- D Cord storage facility
- E Overload protection button
2 Juicer
- F Cover of pusher
- G Pusher with pre-clean function
- H Feeding tube
- I Lid
- J Sieve
- K Direct serve spout accessory
- L Juice collector with (R) detachable spout
- M Pulp window
- N Pulp container
3 Citrus press (HR1870 only)
- O Cone
- P Sieve
- Q Juice collector
- R Detachable spout
- S Citrus press coupling unit
4 Juice jug lid with integrated foam separator
5 Juice jug
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Never immerse the motor unit or the citrus press coupling unit in
water or any other liquid, nor rinse it under the tap.
- Do not clean the motor unit or the citrus press coupling unit in
the dishwasher.
Warning
- Check if the voltage indicated on the base of the appliance corresponds
to the local mains voltage before you connect the appliance.
- Do not use the appliance if the plug, the mains cord or other
components are damaged.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
- This appliance shall not be used by children. Keep the appliance and its
cord out of the reach of children.
- Children shall not play with the appliance.
- Never let the appliance operate unattended.
- Always disconnect the appliance from the mains if you leave it
unattended or before you assemble, disassemble or clean it.
- If you detect cracks in the lter or if the lter is damaged in any way,
do not use the appliance anymore and contact the nearest Philips
service centre.
- Never reach into the feeding tube with your ngers or an object while
the appliance is operating. Only use the pusher for this purpose.
- Do not touch the small cutting blades in the base of the lter. They are
very sharp.
- Always place and use the appliance on a dry, stable and level surface.
- To ensure that the appliance stands stably, keep the surface on which
the appliance stands and the bottom of the appliance clean.
Caution
- This appliance is intended for household use only.
- Do not hold the appliance by the locking arm when you carry it.
- Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories or
parts, your guarantee becomes invalid.
- Make sure all parts are correctly assembled before you switch on
the appliance.
- Only use the appliance when the locking arm is in locked position.
- Before you disassemble the appliance and before you clean it, set the
control knob to off position and remove the plug from the wall socket.
Then lower the locking arm to unlocked position.
- Only lower the locking arm to unlocked position after you have
switched off the appliance and the lter has stopped rotating.
- HR1870: Do not use the citrus press longer than
10 minutes without interruption.
- HR1870: Never immerse the citrus press coupling unit in water nor
rinse under the tap.
- HR1870: Never clean the citrus press coupling unit in the dishwasher.
- Always unplug the appliance after use.
- Noise level: Lc = 78 dB(A).
Safety feature
This appliance is tted with a safety feature which safeguards against
overheating due to excessive loads. In case of overheating, the
juicer automatically activates the overload protection and switches itself
off. If this occurs, set the control knob to 0, unplug the appliance and let it
cool down for 15 minutes. Remove the juice jug and detach the lid, the juice
collector and the pulp container and then press the overload protection
button on the bottom of the motor unit.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the rst time (see chapter ‘Cleaning and storage’).
Tips
- Always check the lter before use. If you detect any cracks or damage,
do not use the appliance.
- Make sure the locking arm is locked into position.
- To keep your juice fresh longer, put the lid on the juice jug after juicing
Using the appliance
Juicer
You can use the juicer to produce fruit and vegetable juice.
Tips
- Do not operate the juicer for more than 60 seconds at a time when
you juice heavy loads and let it cool down sufciently afterwards.
- Turn the control knob to setting 1 (low speed) or 2 (normal speed).
- Speed 1 is especially suitable for soft fruits and vegetables such as
watermelons, grapes, tomatoes and cucumbers.
- Speed 2 is suitable for all other kinds of fruit and vegetables such as
apples, carrots and beetroots.
Notes
- Do not exert too much pressure on the pusher, as this could affect the
quality of the end result. It could even cause the lter to come to a halt.
- Never insert your ngers or an object into the feeding tube.
- If the pulp container becomes full during use, switch off the appliance
and detach the lid and the juice collector. Then carefully remove the
pulp container and empty it.
- After you have processed all ingredients and the juice ow has stopped,
pour the juice from the jug into the glass.
Empty the pulp container
Note: When the pulp container has reached its maximum capacity, pulp ends
up in the juice collector, lid and in the juice.
If the pulp container becomes overlled, the appliance may become blocked.
When this occurs, switch off the appliance and remove the pulp from the
pulp container. Let the appliance cool down for 15 minutes and press the
overload protection button on the bottom of the motor unit to reset.
Note: The pulp window helps you to see when the pulp container is full and
needs to be emptied. Because the pulp window may become blocked before
the maximum capacity of the container has been reached, also check the level
indication on the juice jug. The pulp window is more likely to become blocked
when you juice hard ingredients, such as carrots or beetroots.
Citrus press (HR1870 only)
Note
- If you want to extract juice straight into a glass, use the direct serve
spout accessory.
- To prevent damage and injuries, keep the operating appliance away
from long hair, clothes, cords, etc.
- Only use speed 1 for the citrus press.
Loading ...
Loading ...
Loading ...