Loading ...
Loading ...
Loading ...
10
AUX
R
L
AUDIO OUT
• Use a RCA to 3.5mm audio cable to
connect the TV’s audio output sockets
to the AUX socket on the unit.
Connect the IR pass-through
cable
If the Soundbar blocks the IR receiver of the
TV when placing directly in front of it, you
can connect the Soundbar and TV with the
supplied IR pass-through cable so that it can
receive signal from the remote control of
your TV.
TV Sensor
IR OUT
1 Connect the 2.5mm end of the IR pass-
through cable to the IR OUT connector
on your Soundbar.
2 Then, place the other end with the IR
blaster close to the TV sensor.
For information, check the user manual
of your TV.
Note
• Before you start using IR pass-through, make sure the
TV’s remote sensing area is completely blocked.
• If you nd that the TV’s remote control receiver is not
blocked and still works, you can cancel the connection
of the IR pass-through cable.
Connect to Power
• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the unit.
Conversion plug
Choose the adapter for your region.
If needed, snap on the adapter for your
region.
A B
Soundbar
1 Unwind the mains adapter and mains
cable to their full length. Connect the
mains adapter to the DC IN 24V socket
of the soundbar.
2 Then connect the mains adapter into a
mains socket.
Subwoofer
3 Connect the mains cable to the AC
~
socket of the Subwoofer and then into a
mains socket.
• Power cord quantity and plug type vary
by regions.
Loading ...
Loading ...
Loading ...