Loading ...
Loading ...
Loading ...
4
A
While charging, the charger may get
warm, this is perfectly normal and safe. It
is safe to leave the appliance connected
to the charger indefinitely. The charger
automatically reduces power consumption
when charging is complete.
• When charging is complete, the LED will
turn off.
WARNING: Do not charge the
battery at ambient temperatures below
39°F (4°C) or above 104°F (40°C).
Switching on and off - Figure B
• To switch the appliance on, depress the
on/off button (1). The battery indicator
LED will illuminate and vacuum will begin
in the low-speed mode.
• Depress the button a second time to
engage the POWERBOOST mode. The
green LED will also illuminate, indicating
the vacuum is in the higher-speed mode.
• To switch the appliance off, depress the
button a third time.
B
POWERBOOST mode
The green LED will illuminate when the
appliance is in POWERBOOST mode. The
vacuum will operate at a higher suction level
to pick up debris that requires more power.
Filter sensor (HHVJ315JMF ONLY)
Whenever a lter is blocked and needs
cleaning, the red LED in the handle will
illuminate. Clean dust from lter (See
“Cleaning the Dust Bowl and Filter” section).
Nozzle / Accessories
• A crevice tool (4) is built into the nozzle
(3). Extend the crevice tool as shown in
Figure C, until it clicks in place.
• To shorten the crevice tool, depress the
crevice tool release button (5) as shown
in Figure D and slide the crevice tool into
the nozzle.
C
D
• A brush accessory is built into the nozzle
and can be flipped upwards for use as
shown in Figure E.
E
Dry pick up
• For everyday spills of dry material.
• Do not ll the dust bowl (8) beyond the
end of the intake chute.
Loading ...
Loading ...
Loading ...