Loading ...
Loading ...
Loading ...
17
16. ALARMS
LIGHTS ALARM SOLUTION
on
General alarm Contact Customer Services
+ on steadily
The drip tray (A13) is missing or has not
been inserted correctly
Extract the drip tray then put back cor-
rectly in the appliance
on
Descaling must be performed Proceed as described in section "12.
Descaling"
ashes quickly
The knob (B8) is in descaling position Turn the knob to one of the coee bever-
age position
on +
+ ashing
The lter holder has been detached from
the coee mill before grinding has ended
Repeat grinding
+ ashing
The appliance is being turned on for the
rst time and the water circuit must be
lled.
Proceed as described in section "3. Set-
ting up the appliance"
If the water softener lter (C6) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Press the button (B4) corresponding to
the
light (g. 9). Delivery begins
and stops automatically.
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the lter holder and repeat the
operations to make the coee, bearing in
mind the indications in section "6.4 Se-
lect the grinding level" and the "14. How
to make perfect coee" table.
+ ashing
If the water softener lter (C6) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Press the button (B4) corresponding to
the
light (g. 9). Delivery begins
and stops automatically.
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the lter holder and repeat the
operations to make the coee, bearing in
mind the indications in section "6.4 Se-
lect the grinding level" and the "14. How
to make perfect coee" table.
The lter is blocked, or the perforated
lter is missing
Clean as described in section "11.4 Clean-
ing the coee lters" and check that the
perforated lter is correctly inserted
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the
valves on the bottom
Scale in the water circuit Descale as described in section "12.
Descaling"
Loading ...
Loading ...