Loading ...
Loading ...
Loading ...
Register Online (Camera Initial Setup)
1. After the SIM card and battery are installed,
a red light will be on, and you will hear the voice
prompt"Camera is starting up, please wait". The
red LED will be solid on for some seconds and
go o.
2. A blue LED will flash for some seconds and
then go solid before going out, you would
hear"Network connection succeeded”, which
means the camera has been successfully
connected to the network.
Voice Prompt LED Status Camera Status Solution
3
4
2
1
Red LED is solid on
for some seconds
and then start to
flash
Your SIM card
has a PIN
Camera fails to be
registered to the
operator network
Camera fails to
connect to the
Reolink server
Device will go into Standby mode and try to
reconnect later
Blue LED will not
go solid and just
go o
Red LED is solid on
for some time and
then go o
completely
Note: You may also run into the below situations:
1.Check whether you made a reverse
direction of SIM card
2.Check if the SIM card is not fully inserted,
please insert it again
1.Check whether your card is activated or
not, if not please call your operator to
activate it
2.Your current location may have a weak
signal, please move the camera to a
location with better signal
"SIM card
cannot be
recognized!"
" The SIM card is
locked with a
PIN. Please
disable it"
"Network
connection failed"
Camera cannot
recognize this
SIM card
Put the SIM card into your mobile phone and
disable the PIN
4 English 5English
Loading ...
Loading ...
Loading ...