Loading ...
Loading ...
Loading ...
4.1 US oz (120 cm )
15 lbf·ft (20 N·m , 2.0 kgf·m)
RIGHT REAR
drain boltsealing washer
oil fill cap
lower edge
(Models equipped with center stand)
(Models not equipped with center stand)
151
Changing Oil
Final Drive Oil
Servicing Your Honda
Safety Precautions
Improper disposal of drained fluids is harmful to the environment.
Refer to on page .
Install the oil fill cap.
Make sure the final drive oil level is at the lower edge of the oil fill inspection
hole.
Fill the final drive with the recommended oil:
Place a drain pan under the drain bolt.
Remove the oil fill cap, drain bolt and sealing washer.
After the oil has completely drained, check that the sealing washer is in good
condition. Reinstall the drain bolt with its sealing washer (or a new washer, if
necessary) and tighten it to the specified torque:
Pour the drained oil into a suitable container and dispose of it in an approved
manner (page ).
Change the oil with the final drive at normal operating temperature to assure
complete and rapid draining.
Place the motorcycle on itscenter stand on a firm, level surface.
Hold the motorcycle upright on firm level ground.1.
2.
3.
4.
5.
6.
7.
1.
118
185
１２／１０／３１ １３：５１：１２ ３１ＭＪＧ６００ ０１５８
Loading ...
Loading ...
Loading ...