Loading ...
Loading ...
Loading ...
Step 3:
Playing Back
En-19
■ b. Connecting with an integrated amplifier or
power amplifier in a separate room
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room.
Connect the PRE/LINE OUT ZONE 2 jacks or PRE/LINE
OUT ZONE 3 jacks of the unit and the line-in jacks of the
integrated amplifier in a separate room with an RCA cable.
Settings are required to listen to HDMI input
audio in Zone 2: Press RCV and then Setup on the
remote controller, select "1. Input/Output Assign"
- "TV Out" and set the "Zone 2 HDMI" setting to
"Use".
Zone 2
Main room
Zone 3
Settings are required to adjust audio using this
unit: Press RCV and then Setup on the remote
controller, select "3. Audio Adjust" - "Multi Zone"
and set the "Zone 2 Out" or "Zone 3 Out" setting
to "Variable". Be sure to make this setting if you
connect a power amplifier. If you do not, the volume
output may be big enough to cause damage.
Performing Multi-zone Playback
It is possible to perform playback in the main room and a
separate room at the same time, for example by playing
the Blu-ray Disc player in the main room where the unit is
placed while playing Internet radio in a separate room. It is
also possible to perform playback only in a separate room.
･ With external players, it is possible to play the same
source or different sources in the main room and
separate room.
･ You cannot select separate network services for the
main room and another room with the "NET" input.
･ When listening to AM/FM broadcasting, you cannot
select different stations for the main room and separate
room. Therefore broadcasting of the same station will be
heard in the both rooms.
･ If you have connected the same player by HDMI in the
main room and in a separate room, input to this unit (the
main room) will be 2-channel PCM.
Playing Back
1. Press Zone2 or Zone3 on the remote controller,
point the remote controller at the main unit and
press
z
Receiver.
"Z2" or "Z3" lights on the main unit display and the multi-
zone function is enabled. (Zone 2 or Zone 3 is now on.)
2. Press Zone2 or Zone3 again on the remote
controller and press Input Selector of the input to be
played in a separate room.
･ If you turn the unit to standby during multi-zone
playback, the Z2/Z3 indicators are dimmed and the
playback mode is switched to playback in a separate
room only. Performing steps 1 and 2 while the unit is in
standby also switches the playback mode to playback
in a separate room only. To play the same source in
the main room and separate room, hold down Zone2 or
Zone3 for approximately 3 seconds.
To control on the main unit: press Zone2 or Zone3 and
within 8 seconds, press the input selector button of the
source to be played in the other room. To play the same
source in the main room and separate room, press Zone2
or Zone3 twice.
To adjust the audio in Zone 2 or Zone 3
To adjust the volume, press Zone2 or Zone 3 on the remote
controller and then adjust with VOL
j
/
l
. You can also
temporarily mute sound by pressing Muting. To control on
the main unit, press Zone2 or Zone 3 and within 8 seconds,
adjust with the Master Volume control.
To adjust the sound quality, press Zone2 or Zone 3 on the
main unit and press Tone several times to display "Bass",
"Treble" or "Balance" on the main unit display and adjust it
with + or -.
To turn off the function
After pressing Zone2 or Zone3 on the remote controller,
press
z
Receiver. To control on the main unit, press Zone2
or Zone3 and press
z
On/Standby.
･ Power consumption in standby mode increases when
the multi-zone function is being used.
･ While using the multi-zone function, the RI linked
system function (link between Onkyo components) is
disabled.
･ Pressing Input Selector on the remote controller while
you are using the remote controller for Zone 2 or Zone 3
will switch the controlled target to the main room. To
control Zone 2 or Zone 3 again, press the Zone2 or
Zone3 button to enter the Zone control mode.
WHOLE HOUSE MODE: If you press Whole House
Mode while playback is being performed in the
main room, the WHOLE HOUSE MODE is turned
on, "Z2" and "Z3" on the display light at the same
time and the playback sources of all the rooms are
switched to the same source at once.
･ The sources that can be played in Zone 2 can
be played in all rooms.
･ This function cannot be used if headphones are
connected or audio is output from the speakers
of the TV.
Loading ...
Loading ...
Loading ...