Loading ...
Loading ...
Loading ...
heat shield that may be installed and the
bumper.
4. Replace nonworking bulb.
5. To install the new bulb, proceed in re-
verse order of removal.
Right fog light:
1. Turn the bulb socket counterclockwise
and remove.
The wire is long enough to guide the
socket down and through between any
heat shield that may be installed and the
bumper.
2. Replace nonworking bulb.
3. To install the new bulb, proceed in re-
verse order of removal.
Side turn signal, bulb replacement
Follow the general instructions on lights
and bulbs, refer to page 279.
Bulbs:
– With orange lens: W5W.
– With white lens: WY5W.
1. Open the hood. The covers of the side
turn signal lights are on the left and
right next to the hinges of the hood.
2. Loosen nuts of the cover by hand and re-
move the cover.
3. Turn the bulb socket counterclockwise
and remove.
4. Replace the bulb.
5. To insert the new bulb, proceed in re-
verse order of removal. Insert the nuts
of the cover and press down.
Seite 286
MOBILITY Replacing components
286
Online Edition for Part no. 01402723718 - VI/18
Loading ...
Loading ...
Loading ...