Loading ...
Loading ...
Loading ...
English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
10
Top handle saw
does not start.
The chain brake is engaged. Pull the chain brake towards you until
the chain brake is disengaged.
No electrical contact
between the top handle saw
and battery.
To secure the battery, make sure the
latches on the battery compartment
snap into place.
The battery pack is depleted. Charge the battery pack.
The battery and power tool
is too hot or too cold.
Refer to the battery and charger
maintaince part in the manual.
Motor running,
but cutting
abnormal.
Motor stops after about 10
seconds.
Recharge the battery.
If the unit cuts off and
beeps during a cut, it went
into protection mode. This
protects the PCB from
damage.
Release the trigger and restart the top
handle saw. Let the top handle saw do
the work and do not force the cut.
Battery is not charged. Charge the battery. Refer to the battery
and charger manual for correct charging
procedures.
The saw chain needs
lubrication, and will increase
friction if not properly
maintained.
Make sure the chain is always lubricated
by never letting the bar and chain oil run
low.
Incorrect battery storage
temperature.
Allow the battery pack to cool until it
drops to room temperature.
Loading ...
Loading ...
Loading ...