Loading ...
Loading ...
Loading ...
8
en-us Installation Procedure
Install Appliance
9 WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
1. Secure the appliance cover VD 200 020 (available
separately as special accessory) before fitting on the
appliance.
2. If the appliance is not being covered, seal the
openings on the back of the appliance using the cover
caps supplied.
3. Place the appliance evenly in the cut-out. Push it down
firmly into the cut-out.
Note: The appliance must sit securely in the cut-out
and must not be able to move around (e.g. during
cleaning). If the width of the cut-out is at the upper
tolerance limit, secure battens to the sides of the cut-
out if necessary.
4. Remove the lava stones from the film and place them
in the lava stone tray. Insert the components as shown
in the pictures.
Loading ...
Loading ...
Loading ...