Loading ...
Loading ...
Loading ...
Functions
Note: The buzzer beeps twice when the power supply is rst turned on. The unit
is in ‘standby’ until the On/O button is pressed.
The horizontal louvres need to be opend manually by hand.
ON/OFF
Press the ON/OFF button to turn the unit ON. The default settings when rst turned
on are; medium fan speed, normal mode, and no timer.
To turn the unit OFF press this button again. It may take a few seconds to power o
completely.
FAN SPEED
The FAN SPEED can be selected in the following sequence: quiet > low > medium >
high. The selected fan speed LED indicator light will illuminate accordingly.
COOL / HUMIDIFY
Press this button once to turn on the COOL / HUMIDIFY function, the pump will
start and the COOL / HUMIDIFY LED will illuminate. Press this button again to turn
o the cooling function, and to use as a fan only.
LEFT / RIGHT SWING
Press this button to turn on the SWING function, the louvres will move left to right
and the SWING LED indicator light will illuminate. Press the button again to turn o
the swing function.
TIMER
The TIMER can be set in 1 hour increments up to the maximum timer of 8 hours. The
set time will be indicated on the display panel before switching back to the ambient
room temperature.
MODE
The default mode after turning “On” is normal. Press this button to select modes
in this sequence: normal > smart > natural > sleep. The MODE indicator light will
illuminate accordingly.
NOTE: Natural and sleep modes are unavailable if quiet fan speed is selected.
Normal: Constant wind speed.
8
Loading ...
Loading ...
Loading ...