Loading ...
Loading ...
Loading ...
Changing Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, O-ring, drain
bolt, and sealing washer to drain the oil.
u Discard the oil at an approved
recycling center.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
5.
Fill the final gear with the recommended
oil. 2 P. 52
Required oil: 4.4 US oz (130 cm
3
)
6.
Check the oil level. It should be flush with
the lower edge of the oil fill hole.
7.
Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
8.
Check that there are no oil leaks.
20170726153758_31MFR6800_enu_BOOK Page 79 Wednesday, July 26 2017 15:43:25 JST
Final Drive Oil u Changing Final Drive Oil
Maintenance
76
Oil fill hole cap
Lower edge
O-ring
Drain bolt
Sealing
washer
Loading ...
Loading ...
Loading ...