Loading ...
Troubleshooting
Problem Possible Solution
Flickering and Dimming
features off or on.
y Energy saving : MENUSetup Eco Solution Energy Saving Select Settings
y Eco Sensor : MENU Setup Eco Solution Eco Sensor
✎ This function may not be available, depending on the model.
Screen Color
Diagnosis Test on the TV to make sure there are no device issues.
y Self Diagnosis : User MenuSupportSelf DiagnosisPicture Test
y If the test is ok, try making sure ;
y
used the AV Out jack on your video source.
y
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.
Screen Brightness
settings you should check before calling for a repair.
y
adjusting these options.
Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
y Sleep Timer : User Menu Setup Time Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : User Menu Setup Eco Solution No Signal Power
y Auto Power Off : User Menu Setup Eco Solution Auto Power Off
Trouble Powering On Before you turn the TV on, nd the red light on the right or left bottom of your TV. Press the power on button on
the TV or remote and the light should blink about 5 times before the TV turns on.
before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
Stand Assembly If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation
Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture First, perform the Picture Test and to see if your TV is displaying the test image properly.
MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
it did in the store.
✎
scaled SD content is low.
The picture is distorted has macroblock
Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
A weak signal can cause picture distortion. This is not a TV problem.
Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
The color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of
the screen.
If the picture size is set to Screen Fit
The picture is black and white.
1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
Sound Problems Perform the Sound Test
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is too
The picture is good, but there is no
sound.
Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an
inappropriate noise.
Check the cable connections. Make sure a video cable is not connected to an audio input.
For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
Perform the Sound Test
No Picture, No Video
The TV will not turn on. Make sure the AC power cord is securely plugged into the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
The TV turns off automatically. Ensure the Sleep Timer is set to Off in the Time menu.
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged securely into the wall outlet and the TV.
When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
Make sure your connected devices are powered on.
Be sure to select the correct input source by pressing the SOURCE button on the remote control.
Reboot the connected device by unplugging and then reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receiving all channels.
Run Auto Program to add available channels to the channel list.
MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
Verify the antenna is positioned correctly.
No Caption on digital channels. Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
Some channels may not have caption data.
The picture is distorted: macroblock,
Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
A weak signal can cause picture distortion. This is not a TV problem.
Others
and buzzing noise from the TV speakers
with Component cable connection.
The picture will not display in full
screen.
Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on
the TV.
The remote control does not work.
Clean the transmission window located on the top of the remote control.
does not turn the TV on or off, or adjust
the volume.
A “Mode Not Supported” message
appears.
resolution settings in this manual.
Caption on the TV menu is greyed out. You cannot select Caption
Component.
Caption
There is a plastic smell from the TV. This smell is normal and will dissipate in a few days.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
(unavailable).
The Channel menu is only available when you select the TV source.
Your settings are lost after 30 minutes
or every time the TV is turned off.
If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV
mode, go to MENUSetupPlug & PlayENTER
E
.
You have intermittent loss of audio
or video.
Check the cable connections and reconnect them.
connectors.
You see small particles when you look
closely at the edge of the frame of
the TV.
This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
✎
✎
✎ Some functions and pictures shown in this manual are available on specific models only.
✎ SupportDownloads). To
upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then
select Support > Software Upgrade in the TV's menu.
Storage and Maintenance
✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.
✎
prevent scratches.
Do not spray water directly onto the product.
Any liquid that goes into the product may
Clean the product with a soft cloth
dampened with in a small amount of
benzene, thinners) or a cleaning agent.
License
your device setup menu.
the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
or other countries. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
Open Source License Notice
Open Source used in this product can be found on the following webpage.
Eco Solution
■
Energy Saving (Off / Low / Medium / High): Lets you adjust the brightness of
the TV to reduce power consumption.
■
Eco Sensor (Off / On): To enhance your power savings the picture settings will
automatically adapt to the light in the room.
✎ This function may not be available, depending on the model.
✎ If you adjust the Backlight fuction, Eco Sensor will be set to Off.
Min. Backlight: When Eco Sensor is On, you can adjust the minimum
screen brightness manually.
✎ If Eco Sensor is On, the display brightness may change (become slightly
darker in most cases) depending on the surrounding light intensity.
■
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV
switches to standby mode, if no picture is being received.
✎ Disabled when an attached PC is in power saving mode.
■
Auto Power Off (Off / On): When Auto Power Off is set to On, the TV will
automatically turn off when no user operation is detected for 4 hours.
Application Menu
Storage Class (MSC) device.
P
POWER
MEDIA.P
❑ Connecting a USB Device
1. Turn on your TV.
2. USB
jack on the back of the TV. A pop up window appears.
3. Press the MEDIA.P button on your remote. The Media Play menu appears.
❑ Using the Media Play Menu
To open Media Play in the Menu, follow these steps:
1. Press the MENUApplications
on the left, and then press the ENTERE button.
2. Media Play (USB), and then press the
ENTERE button.
3. Videos, Music, Photos, Settings),
and then press the ENTERE button.
✎ Media Play might not work properly with unlicensed multimedia files.
✎ Read the list below before using Media Play (USB)
x
x Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
x Media Play only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device.
Devices should be connected directly to the TV’s USB port. USB
x Before connecting your device to the TV, please back up your
responsible for any data file damage or data loss.
x
A USB device that requires high power (more than 0.5A) may not be
supported.
x Do not disconnect the USB device while it is loading.
x The higher the resolution of the image, the longer it takes to display
on the screen.
x
x
“Not Supported File Format” message appears.
x The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
x PTP (Pier to Pier) devices are not supported.
x If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be recognized
or may malfunction.
Auto Protection Time
■
Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
the screen saver is activated to prevent the formation of ghost images on
the screen.
x If the TV has no input during the time period set in Auto
Protection Time, the Screen saver will run.
x
released automatically when your connect them to the TV.
x
x If a USB device connected to the TV is not recognized, the list of
connect the USB device to a PC, format the device, and check the
connection.
x Media
Play, use the “Empty the Recycle Bin” function on the PC to
x Photos only supports the sequential jpeg format.
x The Videos option does not support the scene search and
thumbnail functions.
x
some folders may not open.
x
one folder of a USB storage device is 1000.
x The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
Videos
1. In the Media PlayVideos, and then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
- The file name is displayed on the top of the screen with the
playing time.
- If video time information is unknown, playing time and the
progress bar are not displayed.
- During video playback, you can search using the
and
buttons.
✎ In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
y Supported Subtitle Formats
-
Name File extension
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
- Internal
Name Container Format
Xsub AVI Picture Format
SubStation Alpha MKV
Advanced SubStation Alpha MKV
SubRip MKV
MP4
y Supported Video Formats
File
Container Video Codec Resolution
Frame
rate(fps)
Bit rate
(Mbps)
Audio
Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.3gpp
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.dat
AVI
MKV
ASF
MP4
MOV
FLV
VRO
VOB
PS
TS
MAX 30
Dolby
Digital
LPCM
ADPCM
(IMA, MS)
AAC
WMA
Dolby
Digital
Plus
DTS (Core ,
LBR)
30
ASP
Window
Media Video
*.webm WebM 20 Vorbis
Other Restrictions
y Codecs may not function properly if there is a problem with the content.
y Video content will not play or will not play correctly if there is an error in the
content or container.
y
TV’s compatibility ratings.
y
y When the TV is playing video over a network connection, the video may not
play smoothly because of data transmission speeds.
y
y When the TV is playing a video at a bit rate of 10 Mbps or higher, the menu
screens may be displayed slowly.
Video Decoder
Audio Decoder
audio is not supported.
Vorbis is supported for up to 2 channels.
Dolby Digital Plus is supported for up to 5.1 channels.
Music
1. In the Media Play menu, Music, and then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
✎
✎
�
(REW) and
µ
(FF) buttons do not function during play.
✎
✎ If the sound is abnormal when the TV plays MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file may cause
a sound problem.)
Photos
1. In the Media PlayPhotos, then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
✎ NOTE
x While a photo list is displayed, press the
∂
ENTER
E
button on the remote control to start a slide show.
x All files in the file list section will be displayed in the slide show.
x During the slide show, files are displayed in order.
x During the slide show, you can adjust the slide show speed
using (�) (REW) or (µ) (FF) button.
x
✎ Media Play can play Music files automatically during a Slide Show if
Background Music is set to On.
✎ You cannot change the Mode in Background Music until the
Background Music file has finished loading.
y Supported Photo Formats
Image Photo Resolution
Base-line
Progressive
Other Restrictions
y
Playing Multiple Files
■
Playing selected video/music/photo les
1.
2.
✎ NOTE
x A c mark appears to the left of the selected files.
x To cancel a selection, press the Yellow button again.
x To deselect all selected files, press the TOOLS button, select
Deselect All, and then the ENTERE button.
3. Press the TOOLS button, select Play Selected Contents, and then press the
ENTERE button.
■
Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the to
highlight a folder.
2. Press the TOOLS button, select Play Folder, and then press the
ENTERE button.
Media Play - Additional Functions
■
Videos/Music/Photos Play Option menus
TOOLS button.
Category Operation Videos Music Photos
Title
c
Repeat Mode
c c
Picture Size
You can adjust the picture size to your preference.
c
Picture Mode
You can adjust the picture setting.
c c
Sound Mode
You can adjust the sound setting.
c c c
Subtitle Settings
You can play the video with Subtitles. This
function only works if the subtitles have the same
c
Audio Format
You can select the digital audio output format.
c
Audio Language
You can change the audio language if the video
has more than one language.
c
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show.
c
Slide Show Speed
You can select the slide show speed during
the slide show.
c
Background
Music
You can set and select background music when
watching a Slide Show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the
c c c
Settings
Using the Setup Menu
■
DivX® Video On Demand: Shows the registration code authorized
for the TV. If you connect to the DivX web site and register
with the 10-digit registration code, you can download the
registration is completed.
✎
■
Information: Select to view information about the connected USB
device.
❑ Using Sports Mode
t
This mode provides optimized conditions for watching soccer and other
sports.
y
A
(Zoom
part to zoom it in.
✎ When Sports Mode is On, the picture and sound modes are set to
Stadium automatically.
✎ If you turn the TV off while Sports Mode is on, Sports Mode is turned
off.
Support Menu
Self Diagnosis
■
Picture Test: Use to check for picture problems. If the problem appears in
the test picture, select Yes and follow the directions on the screen.
■
Sound Test: Use the built-in melody sound to check for sound problems.
If the problem occurs during the test, select Yes and follow the directions
on the screen.
■
Signal Strength
is either perfect or the channels are unavailable. Adjust your antenna to
increase signal strength.
■
Reset: Reset all settings to the factory defaults.
✎ The PIN input screen appears before the setup screen.
✎ Enter your 4-digit PIN. Change the PIN using the Change PIN
option.
Software Upgrade
Software Upgrade
from samsung.com to a USB memory device.
Use Mode
You can turn the TV into a display model for retail environments by setting
Use Mode to Store Demo.
✎ For all other uses, select Home Use.
✎ With Store Demo, some functions are disabled, and the TV
automatically resets itself after a preset amount of time.
If you selected Manual:
The Clock Set
ENTER
E
.
✎ Available only when Clock Mode is set to Manual.
■
Sleep Timer
t
✎ To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You can
✎ You must set the clock first.
■
On Time / Off Time
On Time and Off Time
Activate.
■
Volume: Set the desired loudness.
■
Contents: To select what will be turned on when the timer setting is
Use the
ENTER
E
button. The Contents screen appears. Use the
buttons to change the values in
- TV/USB: Select TV or USB. The USB device must be connected to your TV
before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to select a
✎
folders, in one folder of a USB storage device is 1000.
✎ The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
1. Music
under Photo, and then press the ENTER
E
button. The TV displays a
single folder (the Root folder) and the type or name of the device.
2. Press the ENTER
E
button. A list of folders on the device appears.
✎ If there are no folders on your device, press the Yellow select
button to select the Root folder, and then press the RETURN
button. The Timer screen re-appears.
3.
photos, and then press the Yellow select button to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
■
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can select the days you want to activate the
the ENTER
E
button. To unselect a day, highlight it, and then press the
ENTER
E
button.
either the ENTER
E
or RETURN button.
❑ Other Features
Voice Guide (On/Off)
You can activate voice guides that describe the menu options aloud to aid the
visually impaired.
■
Voice Guide
provided in the current language.
■
Volume: Set the volume of the voice guide.
■
Pitch: Set the pitch of the voice guide.
■
Speed: Set the speed of the voice guide.
Game Mode (On/Off)
Game Mode
function.
✎ Precautions and limitations for game mode:
x Before you disconnect the game console and connect another
Game Mode to Off in the setup menu.
x If you display the TV menu in Game Mode, the screen shakes slightly.
✎ Game Mode is not available when the input source is set to TV.
✎ After connecting the game console, set Game Mode to On. You may
notice slightly reduced picture quality.
Program Rating Lock
The Program Rating Lock feature lets you block programs you've determined
are inappropriate for your children based on the program's ratings. To access the
Program Rating Lock feature and make any changes, you must enter a PIN (personal
✎ Program Rating Lock is not available in HDMI or Component mode.
✎ The default PIN number of a new TV set is “0-0-0-0”. You can set your own
PIN using the Change PIN function.
How It Works
When you access the Program Rating Lock
screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu
appears. Every time you access the Program Rating Lock functions, the PIN screen will
appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating Lock, and then press
ENTERE. Select On, and then press the ENTERE key again. Depending on what type of
programs or movies you want to block, select one of the options on the screen, and then
press the ENTERE button. The options are listed below:
■
TV Parental Guidelines: You can block TV programs based on their ratings. This function
allows you to control what your children are watching.
■
MPAA Rating: You can block movies based on their MPAA ratings. The Motion Picture
Association of America (MPAA) has implemented a rating system that provides parents
■
Canadian English: You can block TV programs based on their Anglophone Canadian ratings.
■
Canadian French: You can block TV programs based on their French Canadian ratings.
■
Downloadable U.S. Rating: You can use parental restriction information while watching DTV channels.
Locking/Blocking Programs or Movies
option displays a grid or table. All the tables have ratings listed on the left. The TV Parental
Guidelines option also has kinds of content listed across the top: All: Lock all TV ratings.
FVVSLD
Suggestive Dialog.
the square again. When you click a low rating, all the ratings above it will also display locks.
You can also Allow All or Lock All. When done, press the RETURN button on your remote.
■
Change PIN: Select Change PIN and the Change PIN screen appears. Choose any 4 digits
OK
button. The TV has memorized your new PIN.
✎ If you forget the PIN, press the remote-control buttons in the following sequence,
which resets the pin to “0-0-0-0” : POWERMUTEPOWER (on)
Caption
■
Caption: You can switch the caption function on or off. If captions are not
available, they will not be displayed on the screen.
✎ The Caption feature does not work in Component or HDMI mode.
■
Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4:
(analog channels only) The Analog Caption
function operates in either analog TV channel mode or when a signal is supplied
Analog Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital channels only) The Digital
Captions function works with digital channels.
✎ Service1~6 may not be available in digital caption mode depending on the broadcast.
■
Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard, Large, and Extra large. The default is Standard.
Font Style: Options include Default
Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow,
Magenta, and Cyan. You can change the color of the letters. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
and Cyan. You can change the background color of the captions. The default is Black.
Window Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
Cyan. Default is Black.
Foreground OpacityDefault,
Transparent, Translucent, Solid, and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include
Default, Transparent, Translucent, Solid, and Flashing.
Window Opacity: This refers caption to window background, not character background.
Options include Default, Transparent, Translucent, Solid, Flashing. Default is Transparent.
Edge Type: Options include No Edge, Raised, Depressed, Uniform, Drop Shadow. Default is No Edge.
Edge Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
Cyan. Default is White.
Return to Default: This option sets Size, Font Style, Foreground Color, Background Color,
Foreground Opacity, and Background Opacity to its default.
✎ Digital Caption Options are available only when you can select Default and
Service1 ~ Service6 in Caption Mode.
✎ The Foreground and Background cannot be set to the same color.
Boot Logo
Enable or disable the display of the Samsung logo when you turn on the TV.
HD Connection Guide
Contact Samsung
View this information when your TV does not work properly or when you
centers and how to download products and software.
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the wall mount items. Contact a technician
for assistance when installing the wall mount bracket. Samsung
Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
TVWall
mount
bracket
C
Wall Mount Kit Specications (VESA)
✎ The wall mount kit is not supplied, but sold separately.
attaching to other building materials, please contact your nearest
dealer. If you install the TV on a ceiling or slanted wall, it may fall and
result in severe personal injury.
✎ NOTE
Standard dimensions for wall mount kits are shown in the table
below.
When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard
screw specifications.
Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV on a wall.
Product
Family
TV size in
inches
VESA screw hole
specs (A * B) in
millimeters
C (mm)
Standard
Screw
Quantity
LED-TV
43
200 X 200 21.5 ~ 22.5 4
50
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may
cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause
the TV to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included
Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
To prevent the TV from falling
✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and rmly fasten them onto the wall.
Make sure the screws are rmly xed into the wall.
2. Remove the screws from the back center of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps xed onto the TV and the clamps xed onto the wall
with a strong cable and then tie the string tightly.
✎ Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎ Install the TV close to the wall so that it does not fall.
✎
string before moving the TV.
Arranging the cables with the cable guide
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
manual provided with the Kensington Lock for additional information
on proper use.
✎ Please find a “
K
” icon on the rear of the TV. The Kensington slot is
beside the “
K
” icon.
✎ The position and color may differ depending on the model.
- 10 -
- 14-- 13 -
- 11 -
- 15 -
- 12 -
Specications
Environmental Considerations
Operating Temperature
Storage Temperature
50°F to 104°F (10°C to 40°C)
-4°F to 113°F (-20°C to 45°C )
Model Name
Display Resolution
Screen Size
(Diagonal)
43" Class
(42.5" measured diagonally)
50" Class
Sound
Output
20 W
20 W
Body
With stand
Weight
Without Stand
With Stand
23.1 lbs (10.5 kg)
25.3 lbs (11.5 kg)
✎ Design and specifications are subject to change without prior notice.
✎ The actual appearance of the TV may differ from the images in this manual, depending on the model.
✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
■
JACK PANEL DETAIL / REAR VIEW
2
1
6
3
4
5
(Unit:
inches
)
Model name
1 2 3 4 5
15.4
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing
installation of your TV. Not responsible for typographical or printed errors.