Loading ...
Loading ...
Loading ...
Quick Start Guide BD / BF / ED / FD / FED (E3)
Page 4
Controller overview
Normal display
with chambers without fan (BD,
ED) or with fixed fan speed (FD)
Temperature display accuracy:
incubator BD = 0.1 degrees
drying and heating ovens ED, FD =
1 degree
Normal display
with chambers with adjustable fan
speed (BF, FED)
Temperature display accuracy:
incubator BF = 0.1 degrees
drying and heating ovens FED
= 1 degree
Display in standby mode with
standby symbol
Heating active
Timer operation
Overtemperature alarm
of the safety controller
Standby mode
Navigate and
enter the values
Select the
parameter and
confirm the
entered value
Return to pre-
ceding level or
Normal display
Change to
standby mode
when pressed for
3 sec. To activate
the display, press
again 3 sec
Lifting and transporting the chamber
Do NOT lift or transport the chamber using the door handle or the door.
Lift the chamber size 56 and 115 with the aid of 2 people
Lift the chamber size 260 with the aid of 4 people at its four lower corners.
Lift the chamber size 720 using technical devices (fork lifter). Set the fork lifter only from the rear in the middle
of the chamber. Make sure to place all the lateral supports of the chamber on the forks.
Transport the chamber only in its original packaging.
Secure the chamber with transport straps for transport.
Loading ...
Loading ...
Loading ...