Loading ...
Loading ...
Loading ...
4
INSTALLATION
•Only operate the pump when it has water running through it. Failure to do so will overheat the pump and cause it to
fail, thus voiding the warranty. DO NOT OPERATE DRY! Remember, running a Hurricane pump dry voids the warranty!
•Be sure that the pre-lter cage is fully snapped shut. Failure to operate the pump without the pre-lter cage on will
allow large debris to enter the pump, causing the pump to fail and voiding the warranty. To protect your sh or other
pond wildlife from being sucked into the pump, it is highly recommended to not operate the pump without the
pre-lter cage on.
•Do not wear loose clothing that may become entangled in the impeller or other moving parts during installation.
•Keep clear of suction and discharge openings. DO NOT insert ngers in pump with power connected.
•Do not pump hazardous materials or liquids, such as oil, saltwater or organic solvents.
•Be sure no debris will block or restrict the pre-lter cage from water entering.
For more information about our company or products, please visit our website at www.alpine4u.com or call us (USA) 1-877-710-0162
(Figure 3.1)
(chart 1.2)
PUMP INFORMATION
ALPINE
ITEM #
AMPS
(MIN-MAX)
WAT TS
(MIN-MAX)
MAX
FLOW
MAX
HEIGHT
OUTLET
CONNECTION
CORD
LENGTH
GPH FLOW RATE
1ft 5ft 10ft 11ft 13ft 16ft 20ft
PAB1500 .95 114 1585 11’ 5” 3/4”-1 1/4” 33’ 1500 740 206 82 -- -- --
PAB2100 1.20 144 2115 13’ 1” 3/4”-1 1/4” 33’ 2100 1215 634 444 63 -- --
PAB3100 1.60 192 3117 16’ 4” 3/4”-1 1/4” 33’ 3100 1928 1268 1078 697 127 --
PAB4100 2.95 354 4100 23’ 1 1/2” 33’ 4079 2749 1923 1728 1534 901 271
Loading ...
Loading ...
Loading ...