Loading ...
Loading ...
Loading ...
Washer Connections for WSKP2060.
Operating Instructions Safety InstructionsCustomer Service Troubleshooting Tips
4
Portable One-Faucet Connection
Use the hose connector provided with the
washer for a one faucet connection.
To connect the washer:
■Lift the hoses off the storage rack on the
back of the washer.
■Attach the hose connector to the faucet
adapter by pulling down on the locking
collar while lifting up on the connector
until it snaps into place.
■Make sure the
Temperature selector is
set at
COLD/COLD.
■Slowly turn on the water faucet all the
way to the desired temperature setting.
■Pull the electrical power cord from the
back of the washer. Plug the power cord
into a 3-prong grounded outlet.
To disconnect the washer:
■Unplug the electrical power cord and
put it back in its storage area.
■Turn the water faucet off.
■Press the red Water Flow button to
release the water pressure.
■Move the locking collar down and pull
the hose connector down to disengage
from the faucet adapter.
■Drain water from the hoses through the
hose connector.
■Hang the hoses on the storage rack.
Portable Two-Faucet Connections
If you have two separate water connections,
your washer can be connected to both the
hot and cold water faucets. This kit can be
purchased from your dealer or from Parts
and Accessories.
In the United States,
call
800.626.2002.
In Canada,
consult the yellow
pages for your local Camco number.
To connect the washer:
■
Connect hot and cold water inlet hoses
to the hot and cold faucets.
■Secure the drain hose to the sink or
stand pipe.
■
Plug the power cord into a 3-prong
grounded outlet.
To disconnect the washer:
■Turn water faucets off.
■Unplug power cord and return it to the
storage area.
■Disconnect the drain and water supply
hoses. Hang them on the storage rack.
Hose Connector
Cold
Locking Collar
Water
Flow Button
Hose Connector
Loading ...
Loading ...
Loading ...