Loading ...
Loading ...
Loading ...
5) Lift the main body of the
cooker hood towards the hanging
plate.
o If you are going to be using
the hood in extraction
mode, you should feed the
ducting hose through the
hole in the ceiling that you
made in step 1. The ducting
hose should be connected to
your external ducting at this
stage.
6) Use the 10 mm x M4 bolts and
nuts with metal washers (6 pcs)
to attach the angle bars to the
hanging plate.
o IMPORTANT: These
screws MUST be fully
tightened.
7) Slide the upper chimney section
upwards and then use the self tapping
screws (3 pcs) to secure it to the
hanging plate.
27
Loading ...
Loading ...
Loading ...