Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
83
continued
Troubleshooting
4.
Loosen the drive chain lock nuts and
drive chain adjusting nuts on both sides
of the swingarm.
5.
Remove the rear axle nut while holding
the rear axle shaft at the other end with
a wrench.
6.
Remove the drive chain from the rear
wheel sprocket by pushing the rear
wheel forward.
7.
Remove the rear axle shaft, rear wheel
and side collars from the swingarm.
Installation
1.
Install the side collars into the rear wheel.
2.
Place the rear wheel between the
swingarm and install the drive chain over
the rear sprocket.
3.
Insert the rear axle shaft from the left side,
through the left swingarm, wheel hub
and brake panel.
4.
Temporarily tighten the rear axle nut.
5.
Reassemble the brake stopper arm and
tighten the stopper arm nut.
6.
Connect the brake rod to the brake arm.
7.
Adjust the drive chain. 2 P. 67
8.
Adjust the rear brake freeplay. 2 P. 63
9.
Tighten the rear axle nut.
Drive chain
adjusting nut
Drive chain
lock nut
Rear axle shaft Drive chain
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
Loading ...
Loading ...
Loading ...