Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
81
continued
Troubleshooting
Installation
1.
Attach the side collar and speedometer
gearbox to the wheel.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
3.
Position the lug on the speedometer
gearbox against the stopper on the left
fork leg.
4.
Tighten the front axle shaft.
5.
Tighten the axle pinch bolt.
6.
After installing the wheel, apply the
brake lever several times, then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
7.
Install the speedometer cable and
tighten the screw securely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
NOTICE
When installing the wheel, carefully fit the brake disc
between the pads to avoid scratching them.
Torque: 45 lbf·ft (61 N·m, 6.2 kgf·m)
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Lug
Stopper
Loading ...
Loading ...
Loading ...