Loading ...
Loading ...
Loading ...
30
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
Make sure that the CAMERA-TAPE
lamp lights up (p. 22).
1 Touch .
2 Touch and hold (to go
backward)/ (to go forward)
and release it at the point where
you want the recording to start.
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 22).
Touch t .
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to standby.
Make sure that the PLAY/EDIT lamp
lights up (p. 26).
1 During playback, press ZERO
SET MEMORY on the Remote
Commander at a point you want
to locate later on.
The tape counter is reset to “0:00:00”
and appears on the screen.
If the tape counter is not displayed,
press DISPLAY.
2 Press STOP when you want to
stop playback.
Searching manually
(EDIT SEARCH)
Reviewing the most recently
recorded scenes (Rec review)
0:00:00STBY60min
EDIT
0:00:00STBY60min
EDIT
Searching quickly for a desired
scene (Zero set memory)
mREW
PLAY
STOP
ZERO SET MEMORY
DISPLAY
0:00:0060min
P-MENU
GUIDE
Searching for the starting point (Continued)
Loading ...
Loading ...
Loading ...