Loading ...
Loading ...
Loading ...
The camera should only be connected to the devices described in “Using the camera connected to other
devices via Wi-Fi” via Wi-Fi, and should not be connected to other Wi-Fi access points. If you choose to
connect the camera to other Wi-Fi access points, you do so at your own risk. In such cases, the camera may
be subject to unauthorized access, and any communication could be intercepted.
[51] Changing the Settings
Camera settings
Wi-Fi Hi power setting
When you switch the Wi-Fi power setting, the communication distance between the camera and a
Live-View Remote
*
connected via Wi-Fi can be extended by about two times, so you can operate the
camera with the Live-View Remote from a distance.
This setting is only available in some countries and regions.
Note
When set to ON, depending on the physical environment and the distance between the camera and the Live-
View Remote, you may not be able to use the Live-View Remote to turn the camera on/off. In such cases,
operate the Live-View Remote closer to the camera until
on the screen changes to .
Depending on the physical environment and connected device, the communication distance will be changed.
When the Wi-Fi Hi power setting is set to ON, the battery is consumed faster than when set to OFF.
The Wi-Fi icon may not be displayed on the screen immediately after switching the Wi-Fi Hi power setting,
but the icon of the switched setting will be displayed after a moment.
This function cannot be used when the Wi-Fi setting is OFF or when airplane mode is ON.
[52] Changing the Settings
Camera settings
Bluetooth setting
When using RM-LVR3.
*
Press the MENU button.
1
Press the UP button or DOWN button to select (Camera Settings) - (Wi-
Fi Hi power setting) - setting value, then press the REC/ENTER button.
(High power mode. The communication distance is longer than in standard mode)
(Standard mode)
2
Loading ...
Loading ...
Loading ...