Loading ...
Loading ...
Loading ...
37
SMART FUNCTIONS
EN
Using the Appliance Remotely
Remote Start
Use a smartphone to control your
appliance remotely. You can also
monitor your cycle operation so you
know how much time is left in the cycle.
Using this function
1
Put the clothes into the drum.
If desired, add bleach or fabric
softener to the appropriate areas of
the dispenser.
2
Press the
Power
button.
3
Press and hold
Remote Start
button
for 3 seconds to enable the remote
control function.
4
Start a cycle from the
LG ThinQ
application on your smartphone.
NOTE
Once this function is enabled, you can
only start a cycle from the
LG ThinQ
smartpho
ne application. If the cycle is
not started, the appliance will wa
it to
start the cycle until it is turned off
remotely from the application or this
function is disabled.
If the door has been opened, you can
not start a cycle remotely.
Disable this function manually
When this function is activated, press
and hold the
Remote Start
button for 3
seconds.
Standby Power Consumption
Open Source Software Notice
Information
To obtain the source code under GPL,
LGPL, MPL, and other open source
licenses, that is contained in this
product, please visit http://
opensource.lge.com.
In addition to the source code, all
referred license terms, warranty
disclaimers and copyright notices are
available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of
performing such distribution (such as
the cost of media, shipping, and
handling) upon email request to
[email protected]. This offer is
valid for a period of three years after
our last shipment of this product.
This offer is valid to anyone in receipt
of this information.
Standby power consumption
0.5 W
Network standby power
consumption
2.0 W
The period of time after which
the power management
function, or a similar function,
switches the equipment
automatically into standby
and/or off mode and/or the
condition providing
networked standby
20
minu
tes
Loading ...
Loading ...
Loading ...