Loading ...
Loading ...
Loading ...
WALL HOOD INSTALLATION - REMOVABLE BACK PANEL
Duct Tape
Shipping Screws
Removable Back Panel
10" Transition
Shipping Screws
Removable Back Panel
Hood
Assembly
Transition
Centerline of
Removable Back Panel
Sot
Removable Back Panel
10" Duct
Centerline
of Sot
4
e hood is shipped with the removable back panel and
the transition.
Note: e transition is shipped upside down within the
hood. It must be removed then reinstalled.
(See Figures 1 through 3)
To detach the removable back panel and transition from
the hood, remove four (4) screws from the top and four
(4) screws from the back of the unit. (See Figure 1)
Detach the transition from the removable back panel
removing four (4) screws. ese shipping screws are
needed for re-attaching the transition to the removable
back panel.
Secure the transition to the top of the removable back
panel, using the four (4) screw provided. Use duct tape
to seal the joints of the transition and the top of the
removable back panel. (See Figure 2)
To detach the removable back panel/transition from the
hood unit, remove four (4) screws from the top and four
(4) screws from the back of the unit. (See Figure 1)
Secure the back side of the removable back panel to the
wall stud. (See Figure 3)
Using the wire harness from the remote fan, connect it
to the molex plug within the hood cavity.
1.
2.
3.
4.
5.
6.
7.
Power in
In-Hood
J-Box
Hood wiring harness
Remote pigtail
connected to 6-pin plug
* Remote pigtail are supplied with remote fans
(View from back of hood)
Remote
Blower
5-wire in
Molex plug
Figure 4.
Figure 1.
Figure 2.
Figure 3.
Loading ...
Loading ...
Loading ...