Loading ...
Loading ...
Loading ...
©
2015 DJI. All Rights Reserved.
4
2) Plug the powertrain’s JST 3-pin cable into the data port of the Updater and use a
Micro-USB cable to connect the other end of the Updater to a computer. Turn on
the ESC system by connecting it to a 6S LiPo battery and do not disconnect the
powertrain from the computer until the conguration is complete.
3) Run the ESC Assistant software and wait for the ESC to connect to the program.
Watch the indicators on the bottom of the screen. When the ESC has been
successfully connected, the “Computer Connection” status will be solid green and
the Data Exchange Indicator will blink blue.
4) Click on the “View” tab. In the “ESC” section, check the current rmware version
and ensure that the installed firmware up-to-date. If it is not, click the link and
follow the prompts to update it.
If the ESC is not automatically recognized by the DJI ESC Assistant (the
indicators on the bottom of the screen show a solid green and an inactive
blue), check whether there is more than one DJI Updater, FTDI USB adapter,
or other developer tool (including, but not limited to, BeagleBone, Raspberry,
Arduino, etc.), which may use the FTDI chipset, connected to the computer. If
any of these FTDI devices are connected, simply unplug them and keep the
DJI Updater connected to the computer. Then, restart the DJI ESC Assistant
and the ESC system to form a successful connection.
6. ESC LED Indicator & Sound Description
LED Indicators Sound Description
Yellow-Green, blinking in turn
None Motor is being connected
/
Red or Green, blinking slowly
1356 Ready
— / —
Solid Red or Green
None Motor starts normally
Red-Yellow, blinking in turn
None Self-test failure
BB---BB---BB… Input voltage is abnormal
BBB----BBB…
The motor parameters don’t match
the rmware data saved in the
ESC
Yellow, blinking quickly
BBBBBB…
Throttle stick is not at the bottom
position
Yellow, blinking slowly
B------B------B… No signal input
— Solid Yellow None Motors are rotating at full throttle
Red, blinking quickly None Error, land your aircraft immediately*
* You can learn more about an error by connecting the powertrain to the ESC Assistant.
You can interpret the working status of the unit by observing the LEDs and
listening to the sounds emitted from the ESC.
7. Specications
Max Thrust 3900 g/rotor @ 25 V Sea Level
Takeoff Weight Recommended 1200 ~ 1400 g/rotor @ Sea Level
Battery Recommended 6S LiPo
Loading ...
Loading ...